New version 7.64.6.
3) City dropdown menu fixed.
FYI i just found that the pixelization of all channels is due to a Bluetooth adapter i use. When i remove it , lost bytes goto 0 , and picture is stable....
USALS is working.
Now the only thing i see you have to do remaining is the incompatibility with xml parsing.
And another thing i noticed if it could be fixed.I use 3 dvb-s cards (2USB and 1 PCI).
When i (temporary) disable a card, satellites and channels are deleted.
I would prefer channelist be intact and use it with the other USB or PCI skystar HD.
Cheers and Thanks!
LakisFM1
Re: TBS5530 USB - USALS not working
#17Hi Prog,
On xml parsing ,i was looking at all.lists , and cannot understand something.
Why all sats position should end to xx.0 or xx.1 ? i guess to add 2 sat lists in one position?
And how do you define that 28.2 is really 28.2 and not 28.0?
[0280]
pos=0280
0=89 (no. of transponders )
not. it is 28.0
-----------------------------------------------------------------------------------------------------------------------
same on 23.5, you list it as 23.0
[0230]
pos=0230
0=57 (no. of transponders )
The xml includes this as 28.2 , your lists expect 28.0 , i guess , so that's why it thinks sat is not enabled.
(my opinion)
Have a nice Sunday
Lakis
On xml parsing ,i was looking at all.lists , and cannot understand something.
Why all sats position should end to xx.0 or xx.1 ? i guess to add 2 sat lists in one position?
And how do you define that 28.2 is really 28.2 and not 28.0?
[0280]
pos=0280
0=89 (no. of transponders )
not. it is 28.0

-----------------------------------------------------------------------------------------------------------------------
same on 23.5, you list it as 23.0
[0230]
pos=0230
0=57 (no. of transponders )
The xml includes this as 28.2 , your lists expect 28.0 , i guess , so that's why it thinks sat is not enabled.
(my opinion)
Have a nice Sunday
Lakis
Re: TBS5530 USB - USALS not working
#18ProgDVB uses an accuracy of up to 1/10th of a degree. For example 19.2° in config = [0192]
Re: TBS5530 USB - USALS not working
#19sure, so 28.2 should be
[0282]
pos=0282
and 23.5 should be
[0235]
pos=0235
Cheers!
[0282]
pos=0282
and 23.5 should be
[0235]
pos=0235
Cheers!
Re: TBS5530 USB - USALS not working
#20edit3: This is the best solution so far.
Deleted all.list from both the main folder and Program Data folder,
now using plain satellites.xml only in the Program Data folder and all seem to work ok now.
Deleted all.list from both the main folder and Program Data folder,
now using plain satellites.xml only in the Program Data folder and all seem to work ok now.
Re: TBS5530 USB - USALS not working
#21And so. Please remember me. What problem if you use satellites.xml with all.list?
Re: TBS5530 USB - USALS not working
#22Hi Prog! , i didn't understand the question.
If i understand correctly your question,
when using both sattelites.xml and all.list there is a conflict
and have that symptom - when scanning, instead of scan window on 28.2 and 23.5 , the setup dialog opens (like it is not configured).
Now i use only satellites.xml , (deleted all.list) and can normally scan on 28.2 and 23.5 as should.
If i understand correctly your question,
when using both sattelites.xml and all.list there is a conflict
and have that symptom - when scanning, instead of scan window on 28.2 and 23.5 , the setup dialog opens (like it is not configured).
Now i use only satellites.xml , (deleted all.list) and can normally scan on 28.2 and 23.5 as should.
Re: TBS5530 USB - USALS not working
#24the satellites.xml isn't anything special.
i create it from
http://satellites-xml.org/
and i select 30W-70.5E
i create it from
http://satellites-xml.org/
and i select 30W-70.5E
Re: TBS5530 USB - USALS not working
#26No, to keep file clear and small i use the tab "Between limits" and get only 30W-70.5E