Re: TBS5530 USB - USALS not working

#16
New version 7.64.6.

3) City dropdown menu fixed.

FYI i just found that the pixelization of all channels is due to a Bluetooth adapter i use. When i remove it , lost bytes goto 0 , and picture is stable....
USALS is working.

Now the only thing i see you have to do remaining is the incompatibility with xml parsing.

And another thing i noticed if it could be fixed.I use 3 dvb-s cards (2USB and 1 PCI).
When i (temporary) disable a card, satellites and channels are deleted.
I would prefer channelist be intact and use it with the other USB or PCI skystar HD.

Cheers and Thanks!
LakisFM1

Re: TBS5530 USB - USALS not working

#17
Hi Prog,

On xml parsing ,i was looking at all.lists , and cannot understand something.

Why all sats position should end to xx.0 or xx.1 ? i guess to add 2 sat lists in one position?
And how do you define that 28.2 is really 28.2 and not 28.0?

[0280]
pos=0280
0=89 (no. of transponders )

not. it is 28.0 :(
-----------------------------------------------------------------------------------------------------------------------
same on 23.5, you list it as 23.0

[0230]
pos=0230
0=57 (no. of transponders )

The xml includes this as 28.2 , your lists expect 28.0 , i guess , so that's why it thinks sat is not enabled.

(my opinion)

Have a nice Sunday
Lakis

Re: TBS5530 USB - USALS not working

#22
Hi Prog! , i didn't understand the question.

If i understand correctly your question,
when using both sattelites.xml and all.list there is a conflict
and have that symptom - when scanning, instead of scan window on 28.2 and 23.5 , the setup dialog opens (like it is not configured).

Now i use only satellites.xml , (deleted all.list) and can normally scan on 28.2 and 23.5 as should.