progdvb.com

Juergen wrote:Seems, your tuner is not switching to DVB-S2 (properly).
To enable this switch (Pro only), you have to select proper device settings for your hardware.

Yes, Juergen I think you are right.

I'am testing with the pro trial version (XP-32bit) and my device settings are Technisat Mantis Dvbs Bda Receiver which should be right. Perhaps there is a problem with the bda.device driver in combination with my technisat HD2 card ?

HD channels are working perfectly with dvbviewer.

Any Ideas ?

Best regards
Samoth

Try other type in Settings->Device options. For example MS.

Prog wrote:Try other type in Settings->Device options. For example MS.

I tried

Generic BDA
Microsoft compliant BDA driver
AzureWave/TwinHan
Technotrend
Technisat

and dvb-s2 HD channel are not working. I got nothing with transponder scan on 19,2 12421 H 27500.

Best regards
Samoth

Check right dish direction/ l-80, q-100

V.Zhukoff wrote:Check right dish direction/ l-80, q-100

This cannot be because everything is fine with dvbviewer. I think Jürgen is right the switching into the dvb-s2 mode is not working with progdvb.

Best regards
Samoth

however, if you have this percents, you'll have a result in any program.

Has anybody HD channels working in dvb-s2 with a Technisat Skystar HD2 in progdvb ?

Best regards
Samoth

yes/ i heard it in russian part of forum/ im som prb wth my prf 7301

samoth wrote:Has anybody HD channels working in dvb-s2 with a Technisat Skystar HD2 in progdvb ?

Best regards
Samoth

Yes, DVB-S2 works fine. 6.45.03, SS HD2 (1.1.502), Win7/x64

Yany wrote:

samoth wrote:Has anybody HD channels working in dvb-s2 with a Technisat Skystar HD2 in progdvb ?

Best regards
Samoth

Yes, DVB-S2 works fine. 6.45.03, SS HD2 (1.1.502), Win7/x64

Strange. I am using 6.45.03, SS HD2 (1.1.502), WinXP/x32.

Which device option settings are you using ?

Best regards
Samoth

Azurewave/Twinhan

repeat/diseqc command: 2
delay: 200ms
not start more...: not checked

Yany wrote:Azurewave/Twinhan

repeat/diseqc command: 2
delay: 200ms
not start more...: not checked

I am using exactly the same settings and HD channels are not working with progdvb but with dvbviewer all channels are perfect, absolutely strange.

Best regards
Samoth

OK. What s2 transponders you can lock and scan in scan transponders dialog? What what not locked?

Prog wrote:OK. What s2 transponders you can lock and scan in scan transponders dialog? What what not locked?

Hi Prog,

I cannot lock any dvb-s2 channel. The response signal and quality zero.
All dvb-s channel are perfect and no problems with locking and scanning.

I want to scan on astra 19,2 12421 H 27500 dvb-s2 channels.

In dvbviewer all channel dvb-s and dvb-s2 channels are perfect.

Regards, Samoth

Try other mode in Settings device list. For example Microsoft.

ps: I have this card and not have problems with S2.