progdvb.com

SiLencer wrote:

5.05 I have total remake CI support in ProgDVB. In this version it implemented only for WDM driver SkyStar1/Nexus and 3200 cards.

Not working for me...CI Menü works..decrypting not...

Hauppauge Nexus 2.1 and Hauppauge DVB-C and Mascom Alphacrypt CA Module...5.05 Std.

Thanks to Prog for his primilary work.

Only the first CI menu level is see, no access to submenus.
Only first module is see in the dual CI for Nexus
The button to disable/enable CI interface (in options menu : why not in the CAM interface menu ?) doesnt work dynamically and need to restart application to act.
It seem that the ECM arent transmitted to the CAM, why not decrypting (visualized using Diablo LED on)
Other CAM tested : Aston 2, Viaccess Red, Zeta Blue,...

tested and working nearly fine

It's the same error as in version 5.04 - can't report here because this FORUM was down.

Regards
Reing@rd

For TT premium 2300 S in software mode and dual CI interface 3.5"
New for 4.84 :
the module CI interface 1.11 from Sparc doesnt more work, the module seem start too fast, before than ProgDVB enable the CI, but the dual CI is working and decoding well.

For 5.06 (as previous 5.05.x) :
1./ the CI menu see only the first slot (Joker, second Diablo)
2./ decoding only for the first slot
3./ option disabling CI doesnt work without restarting ProgDVB (why not place this option in the CI menu?)

I do not know if someone already posted this, but when I press Options the error occurs.



full message:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ArgumentException: An entry with the same key already exists.
at System.Collections.Specialized.ListDictionary.Add(Object key, Object value)
at ProgDvbEngine.AV.EnumLinesOnAllDevices(ValueType current)
at ProgDvbNet.AudioVideoSettingsForm.SetSettingOnForm()
at ProgDvbNet.AudioVideoSettingsForm.AudioVideoSettingsForm_Shown(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnShown(EventArgs e)
at System.Windows.Forms.Form.CallShownEvent()
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
ProgDvbNet
Assembly Version: 1.0.0.0
Win32 Version: 5.06
CodeBase: file:///C:/ProgDVB_5/ProgDvbNet.exe
----------------------------------------
EngineApiWrapper
Assembly Version: 1.0.2645.27013
Win32 Version:
CodeBase: file:///C:/ProgDVB_5/EngineApiWrapper.DLL
----------------------------------------
msvcm80
Assembly Version: 8.0.50608.0
Win32 Version: 8.00.50727.42
CodeBase: file:///C:/WINDOWS/WinSxS/x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_0de06acd/msvcm80.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
IPDev.Skins
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/ProgDVB_5/IPDev.Skins.DLL
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Design
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Design/2.0.0.0__b03f5f7f11d50a3a/System.Design.dll
----------------------------------------
System.Drawing.Design
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing.Design/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.Design.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.


P.S. Im using skystar1 hardware mode
AMD athlon 1.8 GHz
1 GB RAM
GeForece FX 5500

4.84 5.06 MD irdeto 1.06 cam emulator works and read card data but no video!
It works with Dream dvb!

When stopping progdvb 4.84 (see conditions 2 post before) the CI interface still enabled
when application isnt running.
For the 5.0.6 all my CAMs are working when inserted in the first slot only.

I didn't try 5.0.7, but in 5.0.5.02 when I switch to full mode it doesn't become on top of Windows taskbar (Windows Vista). I don't know if this is a bug or not, but I wanted to report it. Also, the new ProgDVB is slow and takes more RAM & CPU, can you please fix this problem.

DaDag wrote:When stopping progdvb 4.84 (see conditions 2 post before) the CI interface still enabled
when application isnt running.
For the 5.0.6 all my CAMs are working when inserted in the first slot only.

What card you have?

kas_nepatinka wrote:I do not know if someone already posted this, but when I press Options the error occurs.

full message:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

I've just the same bug

Imossible to manage the options

My card is a Nexus-S

ProgDVB ver 4.84.2
After starting program sound goes always to the default audio renderer, even if other sound destination is selected in Audio & Video tab. This happens on every ProgDVB start.

ProgDVB 4.84.4: If you hold a click over the directshow output (the video), you can drag progdvb, even if it is maximized.

TReneR wrote:ProgDVB ver 4.84.2
After starting program sound goes always to the default audio renderer, even if other sound destination is selected in Audio & Video tab. This happens on every ProgDVB start.

Same problem in ver 4.84.4

progdvb 5.07.3/4

In use with a skystar 1 card : When i try to switch between hard and softmode i get : "board controll enable dma not succesfull" and then "device not startet" if i restart progdvb...and it don´t work anymore...

SiLencer wrote:progdvb 5.07.3/4

In use with a skystar 1 card : When i try to switch between hard and softmode i get : "board controll enable dma not succesfull" and then "device not startet" if i restart progdvb...and it don´t work anymore...

same here with nexus

progdvb 5.08 test

window size (windowed) and position are not stored if i restart progdvb...