problem with diseq 1.1 4*1 diseq in twinhan 1034
Posted: Wed Oct 10, 2007 5:22 am
by man2007
problem with diseq 1.1 4*1 diseq in twinhan azurewave 1034
iam recived 3 sat (nilesat-hotbird-badr sat) when change from
channel in nilesat to channel in hotbird not work
but work when change from channel on hotbird to other in the same sat hotbird
the problem from Modules
BDA.Device not found in BDAold.Device but in BDAold.Device the CI not work
and thank you to all
Posted: Wed Oct 10, 2007 11:38 am
by Juergen
Do you receive anything on the third position badr sat ?
Do you receive anything on hotbird, at least occasionally, e.g. did you do your own scan there?
If yes, your 'distinguish by ...' settings may be wrong, test all four possible combinations.
If not, you are out of luck with DiSEqC on your device, probably due to a BDA driver, as those do not support DiSEqC natively, and the proprietary tricks the original software may use are not public..
BTW, for up to four positions in one switch, you don't need DiSEqC 1.1.
Standard 1.0 is enough then.
Posted: Thu Oct 11, 2007 12:12 pm
by man2007
Juergen wrote:Do you receive anything on the third position badr sat ?
Do you receive anything on hotbird, at least occasionally, e.g. did you do your own scan there?
If yes, your 'distinguish by ...' settings may be wrong, test all four possible combinations.
If not, you are out of luck with DiSEqC on your device, probably due to a BDA driver, as those do not support DiSEqC natively, and the proprietary tricks the original software may use are not public..
BTW, for up to four positions in one switch, you don't need DiSEqC 1.1.
Standard 1.0 is enough then.
yes diseq 1.0
and no problem in scan problem when switch from channel from sat to sat
the problem with BDA.Device but not found in BDAold.Device
but the problem in BDAold.Device not work with ci interface
download and try
http://rapidshare.com/files/61793635/Modules.rar.html
with twinhan 1034 azurewave and diseq
thank you..