progdvb.com

hi,

on progdvb 5.15.8 and 5.15.9 there's a conflict between those two frequency's:
12680, V, 8888
12681, H, 8888
at 42.0

the problem is that when i scan those to transponders there's no problem it finds the channels on those transponders.
it seems those two transponders are related with each other for example when i make a change on the channelproperties of one of the channel then the other channelproperty has automatically changed too, so there's no way to watch the two different channels. i always manualy change the channelproperty to watch the two different channels.

You can chenge TID on one of channels.

PS: This satellite total crazy

Prog wrote:You can chenge TID on one of channels.

PS: This satellite total crazy

yes you're right this satelite is crazy

the TID value is 1

i tried to change the TID value but i'm not allowed to do that

P.S. i can change some other properties but then the properties of the other channel is changed too.

SID?

Prog wrote:SID?

changed the SID from 1 to 0 it works

thanks


edit: there's now one more problem after i have changed the SID value to 0 then another channel is disappeard. if i scan it again progdvb finds the channel but after i close progdvb the channel is again disappeard.

Try SID 8191 or slightly below.
Then set station to not update.

Juergen wrote:Try SID 8191 or slightly below.
Then set station to not update.

thanks
i think the function "can update" caused the problem
i set it to not update and it's fixed now