progdvb.com

Hello,

First of all....sorry about my Eng.

I try use ProgDVB to watch analog TV
I have a gigabyte-U 8000 combo TV card (hybrid tuner) and ProgDVB5.16.2 Std
The TV driver is recogniced by ProgDvB as BDA gigabyte. (1.BDA device analog and 2.device digital).

The digital signal works perfectly when select BDA gigabyte digital, but when deselect digital and select the BDA analog (Terrestrial TV) no.

1 - Signal indicator level and quality on max?
2 – Cannot tune PAL Channel (only Russia TV Channels)?

I even entered the PAL frequency manually (in Russia TV Channels.ini) and still nothing.
Can you help me?

Thanks

allskyy wrote: I try use ProgDVB to watch analog TV

The digital signal works perfectly when select BDA gigabyte digital, but when deselect digital and select the BDA analog (Terrestrial TV) no.
1 - Signal indicator level and quality on max?

Many (majority) drivers can not determinate quality of analog signal.

allskyy wrote: 2 – Cannot tune PAL Channel (only Russia TV Channels)?

Now we have a list only for Russian air channels. But you can made frequency and standart (pas/secam/ntsc) list for you country.

Thanks for replying Akad

1- Yes I know, level and quality are taken from the driver used, so they don't have to work correctly for all (card) tuners around. But digital signal works ?

2- I made frequency (PAL) list for my country.Still nothing, it is not possibile to tune channel


Thank you

allskyy wrote: 1- Yes I know, level and quality are taken from the driver used, so they don't have to work correctly for all (card) tuners around. But digital signal works ?

AnalogTuner module do not have a digital signal.

allskyy wrote: 2- I made frequency (PAL) list for my country.Still nothing, it is not possibile to tune channel

can you show .ini file?

Thanks for replying Akad

--allskyy wrote:
AnalogTuner module do not have a digital signal.

Are you shure about that?



--Russia_new.ini file :


TERTYPE]
1=Russia TV
2=Russia TV Channels
[DVB]
;Position = Channelname,Frequency(KHz),Inversion(0,1),0,Bandwidth (7MHz=1, 8MHz=2)
0=61
1=C01,49.0,0,2,PAL_B
2=C02,50.5,0,2,PAL_B
3=C03,57.5,0,2,PAL_B
4=C04,64.5,0,2,PAL_B
5=C05,177.5,0,2,PAL_B
6=C06,184.5,0,2,PAL_B
7=C07,191.5,0,2,PAL_B
8=C08,198.5,0,2,PAL_B
9=C09,205.5,0,2,PAL_B
10=C10,212.5,0,2,PAL_B
11=C11,219.5,0,2,PAL_B
12=C12,226.5,0,2,PAL_B
13=C21,474.0,0,2,PAL_B
14=C22,482.0,0,2,PAL_B
15=C23,490.0,0,2,PAL_B
16=C24,498.0,0,2,PAL_B
17=C25,506.0,0,2,PAL_B
18=C26,514.0,0,2,PAL_B
19=C27,522.0,0,2,PAL_B
20=C28,530.0,0,2,PAL_B
21=C29,538.0,0,2,PAL_B
22=C30,546.0,0,2,PAL_B
23=C31,554.0,0,2,PAL_B
24=C32,562.0,0,2,PAL_B
25=C33,570.0,0,2,PAL_B
26=C34,578.0,0,2,PAL_B
27=C35,586.0,0,2,PAL_B
28=C36,594.0,0,2,PAL_B
29=C37,602.0,0,2,PAL_B
30=C38,610.0,0,2,PAL_B
31=C39,618.0,0,2,PAL_B
32=C40,626.0,0,2,PAL_B
33=C41,634.0,0,2,PAL_B
34=C42,642.0,0,2,PAL_B
35=C43,650.0,0,2,PAL_B
36=C44,658.0,0,2,PAL_B
37=C45,666.0,0,2,PAL_B
38=C46,674.0,0,2,PAL_B
39=C47,682.0,0,2,PAL_B
40=C48,690.0,0,2,PAL_B
41=C49,698.0,0,2,PAL_B
42=C50,706.0,0,2,PAL_B
43=C51,714.0,0,2,PAL_B
44=C52,722.0,0,2,PAL_B
45=C53,720.0,0,2,PAL_B
46=C54,738.0,0,2,PAL_B
47=C55,746.0,0,2,PAL_B
48=C56,754.0,0,2,PAL_B
49=C57,762.0,0,2,PAL_B
50=C58,770.0,0,2,PAL_B
51=C59,778.0,0,2,PAL_B
52=C60,786.0,0,2,PAL_B
53=C61,794.0,0,2,PAL_B
54=C62,802.0,0,2,PAL_B
55=C63,810.0,0,2,PAL_B
56=C64,818.0,0,2,PAL_B
57=C65,826.0,0,2,PAL_B
58=C66,834.0,0,2,PAL_B
59=C67,842.0,0,2,PAL_B
60=C68,850.0,0,2,PAL_B
61=C69,858.0,0,2,PAL_B




Thank you

allskyy wrote:Thanks for replying Akad

--allskyy wrote:
AnalogTuner module do not have a digital signal.

Are you shure about that?

Of course the input signal is analogue, but the analogue tuner will output digital streams. Else the computer could not use it in any way...

Thanks for replying Akad

--Yes, I know that, of course, that analogue tuner will output digital streams, but I mean:
What about output indicator quality of analog signal ?

--Russia_new.ini file ?

Thank you

allskyy wrote: What about output indicator quality of analog signal ?

Don`t know on you tuner. May be it mean nothing.
It depends from drivers.

allskyy wrote: --Russia_new.ini file ?

Try lines:
1=C01,49.0,PAL_B
2=C02,50.5,PAL_B
.....
See example in Russia.ini from install.
Are you sure, that frequency is right?

Thanks for replying Akad

-- OK, may be…

-- I try, but no use.
I know, C01 is wrong, of course (I put there only for number, C04-C69 is 100 % ok)

Thank you

Akad,

??????


As always, Thank YOU

allskyy wrote: What about output indicator quality of analog signal ?

There's no system standard defined for making such readings available for a software that does not fully attach to the hardware driver directly.
Means, the analogue module would need to know one extra trick for each hardware around...
And besides of this, the analogue module is not just made for tuners, as in fact it tries to grasp any suitable video and audio signals, regardless of origin, as long as it recognizes the source somehow.

Even sees my video editing hardware, though it can't connect to it, due to old VfW interface and MJPEG hardware in use there.
Anyway, that FAST AVMaster device of course does not have tuning level indication, as there's no tuner on it. Audio in and out levels would be available, but pretty useless for ProgDVB.

allskyy wrote: -- I try, but no use.

Are you sure, that Analog module start and work normal? For example, can you see trial line of elecard video encoder?

Akad wrote:

allskyy wrote: -- I try, but no use.

Are you sure, that Analog module start and work normal? For example, can you see trial line of elecard video encoder?

Thanks for replying Akad

Yes I’m shure that Analog module start normal, but work is not good. Also, they not remember PAL select.

Thank you