progdvb.com

hi, new problem with new card i have given up with the twinhan ad-sp400 picked all channels but hd was intermittent, so ive purchased a hauppauge 4000, installed latest drivers, new install of vista x64 service pack 1,

i have tried all new versions of progdvb with new transponders lists, and in diseqc settings sky 28.2 only, no posistioner etc.. it will scan all channels except s2 hd channels, when i goto transponder scan and select a s2 hd frequency and DVB-S2 box ticked press LOCK the signal is full but no quality and when i press scan nothing

when i select a non hd transponder and click LOCK there is signal and quality, again i have tried with 2 satellite dish inputs signal good

any ideas please

Pilot/rolloff values can be inportant also for this card.

ps: Also you must install last dirver.

hi prog, when i put a tick in dvb-s2 select box the setting load automatically, but i have tried changng to lyngsats hd settings and still nothing, the latest drivers are installed from the hauppauge website.. nothing

any more suggestions ?