Page 1 of 1
No channels or Internet with Terratec Cinergy T2 (USB)
Posted: Thu Oct 29, 2009 10:35 am
by Lothar
Hello there,
i have a Cinergy T2 that comes with it's own software that works (finds the DVB-T channels without any problems).
The I installed ProgDVB v6.22.01, choosed "BDA driver" and tried to find any TV-channel :
.
What am I doing wrong ? The Terratec-software was closed and the latest BDA-driver is already installed, the blue lED is activated on program startup.
I also can't listen to any radio-station or see any video-stream.
Any ideas ?
Cheers,
Lothar
.
Posted: Thu Oct 29, 2009 10:59 am
by Prog
Same problem with scan transponder dialog?
Posted: Sat Oct 31, 2009 10:39 am
by tallinn_k
I have exactly the same problem.
Terratec Cinergy Hybrid T USB XS, Terratec driver 5.9.304.0, Windows 7 x64
I’ve tried several configurations including older driver versions and ProgDVB program releases (Transponder or Blind Scan as well), but none of them worked. No channels found.
Posted: Sat Oct 31, 2009 2:13 pm
by Lothar
When I go to transponder "C25 - 506 - 8 Mhz" ProgDVB finds the channels
there as other software.If I choose transponder "C29 - 538 - 8MHz" no
channels are found here - but other software does.
DVB-T is broadcasted on 506/538/586/722/746/818 MHz in my region.
If I select transonders "Internet TV", "Internet Gate Client" or "IPTV-Client"
nothing is found there.
(WinXP with SP3 / 32bit, latest BDA-driver 2.3.0.26)
.
Posted: Sat Oct 31, 2009 2:32 pm
by Prog
try select Microsoft in Settings->Device options
Re: .
Posted: Sat Oct 31, 2009 4:40 pm
by tallinn_k
Prog wrote:try select Microsoft in Settings->Device options
Thank you for fast respond.
I’ve just tried it, and there was no difference. Absolutely no channels found
Terratec software at the same time finds about 30 channels within 20 seconds.
Posted: Sat Oct 31, 2009 7:33 pm
by Lothar
I went to "Settings" / "Device List" und de-activated everything except
the BDA-driver ---> No change
I went to "Settings" / "Device List" and changed the properties for the
BDA-driver from "Terractec" to "Microsoft comaptible" and restartet
ProgDVD ---> No change
Posted: Tue Nov 03, 2009 7:59 am
by Lothar
Any more ideas ?
Posted: Fri Nov 20, 2009 9:09 am
by xed_it2002
I have the same problem with my Terratec H7 card... please help us!
Posted: Wed Nov 25, 2009 8:24 am
by antipro
same here with cinergy xxs
.