Page 1 of 1
diseqc does not switch to second LNB
Posted: Sun Jan 31, 2010 6:39 pm
by Rschnauzer
Hallo,
I tested in several versions of ProgDVB to receive from both LNBs.
It is not a problem of the driver
http://www.creatix.de/support/download/ ... 01a_tv.zip the program Sceneo TVcentral Core scans both LNBs and receives TV from both LNBs.
I specified a switch and LNBs for Astra 19.2 and Hotbird 13.0 in ProgDVB.
But if I try to scan Hotbird I get only duplicate TV-Stations from Astra.
The following parameter are set in DiseqTree.ini, I am missing the diseqc parameter 1/2 or A/B. Are these defined at a different point?
Code: Select all
[Tuner_3]
ID=5
CableTransponderList=
Caption={BDA} 713x BDA DVBS Tuner
DevID=66FF86C802626461006465766984
[Tuner_3_0]
ID=2
Type=3
ListName=130;0;192;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
[Tuner_3_0_0]
ID=1
ListName=192;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
[Tuner_3_0_1]
ID=1
ListName=130;0
LOF1=9750000
LOF2=10600000
Switch=11700000
Power=1
Type=0
All actual transponders are stored in directory Win/Program Files/Transponders (0130.ini, 0192.ini, all.list) but while scanning Hotbird only {0} from {1} is displayed. How may I check whether the correct transponders are used?
Re: diseqc does not switch to second LNB
Posted: Sat Nov 26, 2011 4:03 pm
by Gompf
Hi,
Have you ever been able to resolve this issue ? I have this with a Terratec S2 usb and a Terratec S7, no matter what i do, it won't switch to the second port, and always returns the first port signal.
I tried many different version of ProgDVB, but the issue remains. MediaPortal, Transedit, and others can switch the ports. For Mediaportal it suffers from the same issue in fact, until the tuningspace is fixed to DVB-S in the settings, then it works.
/Gompf
Re: diseqc does not switch to second LNB
Posted: Sat Nov 26, 2011 4:05 pm
by Prog
Try change mode in Settings->Device Options.
Re: diseqc does not switch to second LNB
Posted: Sat Nov 26, 2011 4:33 pm
by Gompf
It was automatically set to Terratec, but i also tried Azurwave and Microsoft Generic, all does not work.. which one you think i should change it to ?
BTW, I also have found another bug in This software, I have more than 20 BDA devices in the system, if all enable, ProgDVB will not see anymore BDA devices at all, the list of devices will stay empty.
/Gompf
Re: diseqc does not switch to second LNB
Posted: Sat Nov 26, 2011 4:39 pm
by Prog
Really 20 devices? Hm. I am not test for that ProgDVB. May be some problem...
ps: How you connect 20 devices in one PC?
Re: diseqc does not switch to second LNB
Posted: Sat Nov 26, 2011 4:46 pm
by Gompf
With a few USB Controllers so i have enough bandwith.
10 x Terratec S7 usb
10 x Terratec S2 usb
8x AF9015 DVB-T Usb
I use this for my personal Mediaportal Server, to stream and transcode. I also use DVBLink to bridge to Mediacenter via Network, and Stream to my workplace in the far east so i have tv there.
I use Progdvb for a special transcoding need, but i can't use it now because of the diseqc issue. i read in the forum more and more, it seems this issue happen from time to time to people.
/Gompf
Re: diseqc does not switch to second LNB
Posted: Sat Nov 26, 2011 5:20 pm
by Prog
But what real manufacture of this device? Also possible change repeats and other settings.
ps: I am interesting debug ProgDVB for your exotic configuration and prepare special test version in near days.
Re: diseqc does not switch to second LNB
Posted: Sat Nov 26, 2011 5:51 pm
by Gompf
I am not sure who is the manufacturer, but for the S2 i read it is the same as SU1600HD , and the S7 is the same as a the Technisat SkyStar USB CI.
I know the PCI stuff from Terratec is from Azurewave, but for the usb stuff i am not so sure.
Re: diseqc does not switch to second LNB
Posted: Sat Nov 26, 2011 5:53 pm
by Prog
Afaik SU1600HD is geniatech.
Re: diseqc does not switch to second LNB
Posted: Sat Nov 26, 2011 5:59 pm
by Gompf
Yes, i found in the CrazyScan forum a reference to :
http://www.geniatech.com/pa/hdstar.asp
Re: diseqc does not switch to second LNB
Posted: Sat Nov 26, 2011 6:06 pm
by Gompf
Bazinga: Changing to Geniatech did the Job for the S2
Now left to find the S7
btw i have sent you a pm with my skype/email, for the debuggig if you want me to test your special version when you have it.
Re: diseqc does not switch to second LNB
Posted: Sat Nov 26, 2011 6:46 pm
by Gompf
Bazinga^2: Terratec S7 works with the Aurewave/Twinhan/Technisat setting, not with the Technisat setting itself.... So i guess the S7 is an Azurewave clone.....