progdvb.com

Still support is not perfect. 2 observations:
1- When you scan a single tp all sat channels comes
2- Sometimes no audio and no video when you click on a channel. You have to re run ProgDVB

Thanks.

1. What you mean? Do you have diseq?
2. Do you have lost packets in (tooltips of quality indicator) ?

1- Yes there is diseq (3 sats: Badr, Nile, Hotbird). As a reult of scanning for a single transponder (one frequency) all sat channels comes instead of only the packet channels.
2. No. this problem is intermittent.

I tried this:
Unistalled ProgDVB cleanly. Installed it agin selecting BDA as the device instead of KWorld. Both 1 & 2 solved BUT the recorded part has frozen frames.

ProgDVB v6.50

1. Problem 1 is slightly solved. More fix is required. I made this test: I scanned a single transponder then deleted it then scanned another one. The second scan resulted both as if I did not delete the first. This keeps going like that. Means if you scan for 3rd transponder after deleting 1st and 2nd all will come as a result of last scan.

2. Problem 2 seems to be solved. So far no signal drop when changing from channel to channel although there is a noticeable delay for the signal to come. Recording also seems to be OK with no frame drop. I will report any further abnormalities.

3. Another problem with HD channels that they appear with black surrounding not like the previous version where the picture occupies the full width of the screen.

4. So many scrambled and unwanted channels are to be deleted after ProgDVB completes installation with full auto scan of all sats. It would be more practical if this is left as an option like before.

ProgDVB 6050.1 (ProgDVB Scheduler Problem)

I tested the following:

• Scheduled recording Ever Week (Th Fr) at 03:55 PM (1hr) working OK but reports it failed
• Scheduled recording Ever Week (Th) at 08:55 PM (1:40hr) working OK but reports it failed
• Scheduled recording Ever Week (Fr) at 08:55 (1:20hr) PM working OK but reports it failed
• Scheduled recording Ever Day at 12:45 AM (1:45hr) NOT WORKING.
• Scheduled recording Ever Week (Sa Su Mo Tu We Th Fr) at 12:45 AM (1:45hr) NOT WORKING.
• Scheduled recording Once at 23:55 PM (10min) working OK.
• Scheduled recording Once at 12:10 AM (10min) working OK.

Thanks for report. I check scheduler again. but letter.

Yet another problem with ProgDVB scheduler:

Recording was set @ 15:55 to record channel 'A'. Before this time I was watching channel ‘B’. Recording started as scheduled but from channel 'B'!
Recording from channel 'A' will go fine (as scheduled) if ProgDVB is closed.

What mode of scheduler?

ps: It looks like damaged channel list. I think best way if you remove all files from channels directory and scan again. You can backup files before that.

Scheduler still has problem. When setting an EVERYDAY recording @ 00:45 (i.e. 12:45 AM) it dose not work while setting recording once at the same time works! NOTE: setting EVERYDAY recording @ 12:45 PM works OK.