Page 1 of 1
problem with diseq 4*1 with progdvb pro 6.82.01
Posted: Sun Jan 22, 2012 11:06 pm
by star
problem with diseq 4*1 with progdvb pro 6.82.01
sat1=astra 19 e
sat2=nilesat 7w
sat3=eutelsat 7e
sat4=hotbird 13 e
dvbs card = tevii s464 dvbs-2 with final driver
o.s =win 7 x64 bit
processor intel core 2 duo e6600
ram 8 GB
the problem
when channel search used ( ALL )
the scan get channel from sat 1 in sat 2 and sat 3 etc
the diseq not work good ..
only work good when scan sat by sat .. manual
Re: problem with diseq 4*1 with progdvb pro 6.82.01
Posted: Mon Jan 23, 2012 8:00 am
by Prog
Try change settings in Settings->Device options. If switch is working time to time, then ProgDVB send correct commands but problem on analog level.
Re: problem with diseq 4*1 with progdvb pro 6.82.01
Posted: Tue Jan 31, 2012 12:35 am
by star
the problem again when remove channel from base
in channels.inf
[ChannelTreeCollection]
Count=4
name1=YouTube.list
name2=InternetTV.tree
name3=MostPopular.tree
name4=recorded.list
name5=recorded.list
name6=recorded.list
name7=recorded.list
name8=recorded.list
when not remove
name5=recorded.list
name6=recorded.list
name7=recorded.list
name8=recorded.list
not work good with a diseqc
Re: problem with diseq 4*1 with progdvb pro 6.82.01
Posted: Tue Jan 31, 2012 1:50 pm
by Prog
Diseq not depended from this file.
Re: problem with diseq 4*1 with progdvb pro 6.82.01
Posted: Tue Jan 31, 2012 11:05 pm
by star
Prog wrote:Diseq not depended from this file.
yes but the problem in ?
Re: problem with diseq 4*1 with progdvb pro 6.82.01
Posted: Tue Jan 31, 2012 11:25 pm
by star
Prog wrote:Try change settings in Settings->Device options. If switch is working time to time, then ProgDVB send correct commands but problem on analog level.
this selectin not work !
Re: problem with diseq 4*1 with progdvb pro 6.82.01
Posted: Wed Feb 01, 2012 1:30 pm
by Prog
Same in Settings->TV sources in Properties of device
