progdvb.com

I hunted in the forum but couldn't find a hit on this.

progDVB Version 4.80.1
Skystar 1 card (premium 2100-C)
No graphs selected in Directshow settings (entries blank).
Sound output from Skystar1 connected to line-in on mobo (ASUS SLI premium, NForce 4 chipset - AC3 sound onboard).
Win XP SP2 plus service.
CPU runs at about 10 percent when viewing.
Sound synch in other DVB apps is fine.
In progdvb ithe sound preceeds the picture by some margin - not a 'slight lip synch issue'. Looks like at least a second - and makes picture unwatchable.
If I record to an mpg file and playback sound synch is fine.

Have scratched around and played with settings but am stumped.

Any clues please ?

Hi ,

Hard or Softmode ?

CPU runs at about 10 percent when viewing.

sounds like softmode...in device options check ´audio over filter´ or disable Line in of your sound card...

Wow - fast and accurate !! Many thanks.
yep in softmode - in hardmode don't get a picture but was waiting to solve that..
I don't have that option - will attempt to attach screen shot.

Arrgh can't see attachement gizmo have uuencoded and will paste below - hope its not too big...

--- NTUUCODE version 2.0 by Jemearl Smith ---

begin 666 softmode
---

seems it was too big how can I attach 68kb jpg ? ?

With the card you use you must have this option in device options...so maybe upgrade to 4.82 ...

there may well be something deeper then.
here is the box that comes up when I click Settings -> Device Options

http://img265.imageshack.us/my.php?imag ... odemw0.jpg

ok , check first ´disable decoder in softmode´ and then ´audio over filter´

Thanks.
will do - will be a coupla hours till I can try that with a signal.

Still can't spot 'audio over filter' anywhere..

ah...what i see yet...uncheck ´receiver mpeg2 from skystar 1´...these are very old hardware routines that don´t work very good...corrupted recordings may the result is you use that...

recordings all good....(up till now..)

Will look for latest version of progdvb and install that.

Hey , whats so difficult ???
First uncheck 1

then check 2

if this not solve your problem then check 3

Check my imageshack link - my screen doesn't look like that.

Will see if it does after I install 4.82.

Because you don´t unchecked ´receiver mpeg2 from skystar 1´

Just make it so :

First uncheck 1

then check 2

if this not solve your problem then check 3

As i wrote before : If this not work then :

SiLencer wrote:Hi ,

disable Line in of your sound card...

Method to get sound from a TT 2100-DVBC premium card is to connect to line-in - according to TT folks. But will try with the disconnect.

Method to get sound from a TT 2100-DVBC premium card is to connect to line-in

Not in Softmode...here comes the sound over the pci bus too ...

Installed 4.82. Now my device option pop up matches yours !!!

unplugging line-in cures sound issue also.

many thanks.

Now to get it working in hardmode !