progdvb.com

Hello,

today I decided to update ProgDVB from version 7.06.06 to 7.12.7. In the new version some channels cannot be tuned in correctly anymore on my second LNB (Hotbird 13.0 E). I especially had no signal for the transponder at 11681 MHz, but using blind search I found it at 11675 MHz. Reinstalling the old version, everything is fine and the transponder is at 11681 MHz where it is supposed to be. I use a Hauppauge WinTV-NOVA-HD-S2. Could there be some kind of bug that sets the tuner to a slightly shifted frequency?

In TV Sources->LNB?

LOF 1 / LOF 2 are set to the standard values 9750 MHz and 10600 MHz and these are the right ones for my LNB. There is no hardware problem with the LNB either as all transponders have their correct frequencies on both my TV and on ProgDVB 7.06.06. Only when I use ProgDVB 7.12.7, I have to change the frequency from 11681 MHz to 11675 MHz for this transponder. So just to be sure, you know what I meant: I don't want to shift the tuning frequency myself. I think that ProgDVB 7.12.7 sets the wrong frequency, at least for my card. It is strange however, that this is only the case for very few transponders and only on LNB 2 (using Diseqc Multiswitch)