progdvb.com

Hello,

1) With ProgDVB 6.93e or 6.94 and my TBS 5925, I can receive MIS transponders with or without PLS.
But sometime when I scan a transponder, I have this message "ProgDVB engine restarting!"

2) With versions 6.95 and 6.96 , I cannot receive MIS transponders with or without PLS, no signal !
With "normal" tranponders DVB-S or S2 no problems.

I use Windows 8.1 - 32bits.
TBS Drivers 1.0.1.9

Thanks for reply
Best Regards

Please send me logs.

Hi Prog,

For the first problem,
This log is from ProgDVB 6.93e.
I have scan some transponders on "astra 19east" and with the last scan > ProgDVB engine restarting!

Hi Prog,

For the second problem, the log is from 6.96.02
Test on HotBird 13east 11432 V 27500 and 11919 v 27500
In manual seach I cannot hit "Physical Layer Scrambling" to introduce value of "root".
My TBS.ini look like this :
[Common]
; Logging level. Default disabled (0).
Log=1
; Use direct hardware control. Default disabled (0).
HWControl=1
; Signal levels type. 1 - Level=SNR*5, Quality=f(BER). 2 - Level=100+RFLevel, Quality=SNR*5.
; Default use levels from driver (0).
LevelsType=1
; RFScan delay(ms) before AGC read. Default 10 ms.
;Delay=0

Thanks for reply
stp

Hi Prog,
Any new for this problem ?

I have put those 3 files : BDA.Device - TBS.eBDA - TBS.eBDA2 from ProgDVB6.93e into ProgDVB6.96.02.
This last work fine except sometime a problem like "ProgDVB engine restarting" pending scan !

Thanks for reply
Best Regards
stp

new version must working without ebda2 also.
Do you have last device driver?

Don't work without ebda2

Work with ebda2 from 6.96.02...I think is same like 6.93e ? It's same size !

I have tbs driver 1.0.1.9
Thanks

Hi Prog,

I have tested ProgDVB 6.97, don't work with my TBS5925 and transponders MIS with or without PLS.
If I put the 2 modules - BDA.Device and TBS.eBDA - from ProgDVB 6.93e into 6.97 all work fine.

Thanks for reply
Best Regards
stp

Hi Prog,
Sorry for this post ... again !
I have tested ProgDVB 6.97.02b (Fixes of BDA), don't work with my TBS5925 and transponders MIS with or without PLS.
If I put the 2 modules - BDA.Device and TBS.eBDA - from ProgDVB 6.93e into 6.97.02b all work fine.

Thanks for reply
Best Regards
stp

Old version working total other way (not over driver). I will prepare test version for you later.

Ok Prog, undersood !
Thanks

Please try last prerelease.

Hi Prog,

I have tested prerelease 6.97.03f.

I can receive transponders in MIS but not the transponders wit PLS.
In manual search, I can hit Multistream filter but cannot hit Physical Layer Scrambling !

Some problem on 45°east to have picture on 45.0e 11591 v 30000 3/4 stream 2 3 4 (without PLS)

I send you a log.

Global scan problem seems to be fixed !

Thanks for reply
Best Regards
stp

Hi Prog,

I have tested 7.00

Great work for this new ProDVB, fast start, fast channel change etc !

But...
I can receive transponders in MIS but not the transponders wit PLS.
In manual search, I can hit Multistream filter but cannot hit Physical Layer Scrambling !

Thanks for reply
Best Regards
stp

Try "d" prerelease.