Display posts from previous
Sort by

TBS-5925 and Multi Input Stream

#1 by stp
Hello,

1) With ProgDVB 6.93e or 6.94 and my TBS 5925, I can receive MIS transponders with or without PLS.
But sometime when I scan a transponder, I have this message "ProgDVB engine restarting!"

2) With versions 6.95 and 6.96 , I cannot receive MIS transponders with or without PLS, no signal !
With "normal" tranponders DVB-S or S2 no problems.

I use Windows 8.1 - 32bits.
TBS Drivers 1.0.1.9

Thanks for reply
Best Regards
Last edited by stp on Sun Dec 08, 2013 1:36 pm, edited 1 time in total.

Re: TBS-5925 and Multi Input Stream

#4 by stp
Hi Prog,

For the second problem, the log is from 6.96.02
Test on HotBird 13east 11432 V 27500 and 11919 v 27500
In manual seach I cannot hit "Physical Layer Scrambling" to introduce value of "root".
My TBS.ini look like this :
[Common]
; Logging level. Default disabled (0).
Log=1
; Use direct hardware control. Default disabled (0).
HWControl=1
; Signal levels type. 1 - Level=SNR*5, Quality=f(BER). 2 - Level=100+RFLevel, Quality=SNR*5.
; Default use levels from driver (0).
LevelsType=1
; RFScan delay(ms) before AGC read. Default 10 ms.
;Delay=0

Thanks for reply
stp
Attachments
Logs.rar
(9.75 KiB) Downloaded 330 times

Re: TBS-5925 and Multi Input Stream

#9 by stp
Hi Prog,
Sorry for this post ... again !
I have tested ProgDVB 6.97.02b (Fixes of BDA), don't work with my TBS5925 and transponders MIS with or without PLS.
If I put the 2 modules - BDA.Device and TBS.eBDA - from ProgDVB 6.93e into 6.97.02b all work fine.

Thanks for reply
Best Regards
stp

Re: TBS-5925 and Multi Input Stream

#13 by stp
Hi Prog,

I have tested prerelease 6.97.03f.

I can receive transponders in MIS but not the transponders wit PLS.
In manual search, I can hit Multistream filter but cannot hit Physical Layer Scrambling !

Some problem on 45°east to have picture on 45.0e 11591 v 30000 3/4 stream 2 3 4 (without PLS)

I send you a log.

Global scan problem seems to be fixed !

Thanks for reply
Best Regards
stp
Attachments
Logs.rar
(117.14 KiB) Downloaded 298 times

Re: TBS-5925 and Multi Input Stream

#14 by stp
Hi Prog,

I have tested 7.00

Great work for this new ProDVB, fast start, fast channel change etc !

But...
I can receive transponders in MIS but not the transponders wit PLS.
In manual search, I can hit Multistream filter but cannot hit Physical Layer Scrambling !

Thanks for reply
Best Regards
stp