I have a TeVii card and a Stab HH-120 motor (both with Usals). I have not understood how to drive the antenna into "0" postion (for adjusting it into south direction).

ProgDVB use USALS only for satellite positions.

Prog wrote:ProgDVB use USALS only for satellite positions.

But how to tell the motor to turn into 0 position and wait there?

petediscrete wrote:From what I can figure very few DVB cards will drive your H-H motor.I think Skystar2 does but I have had no luck with the Hauppauge range.I use an external STB to drive the motor.Not ideal but it works

Thank you for the answer.

I am not sure that i declared clearly what i want. Now again.

I am using ProgDVB, a TeVii card that knows speaking Usuals and DisEqc1.2, and a dish motor that also speaks Usuals and DisEqc1.2.

Digital TV receivers that know Usuals often have a button "Goto 0". This is helpful to adjust the antenna to south.

I hope that this feature is also available with ProgDVB. I do not have an external receiver and i am still trying to find the satellite radio stations from Germany, Switzerland, Czech Republik, Great Britain, Slovakia, France and more.

Thanks for any help in advance.

Jo

Copied from STAB H to H mount manual

Return to the 0 position of the rotor... This function enables the rotor to return to the 0 position and to reset the inside counter. It is very important to re-align all satellite positions that can be slightly slid eastwards or westwards from the reference stored positions. In a receiver, this function could be named "RE-ALIGN", "RESET", GOTO POS 00" or "REFERENCE"

ProgDVB does show a "Goto 0" in its USALS menu, but this does not move the motor/rotor to position 0 which is a shame as it would be usefull.