channels are shown as FTA, when realy the channel have encry

#1
Hi,

In all the versions of ProgDVB I've tried many years ago, there is a bug with the scrambled channels, many marked as open when they actually have encryption.

Some examples:
prog_enc_fail.png
smartdvb_encr_ok.png
- sorry for my english.
PC: Windows 7 x64, PIV 3.00 Ghz, ATI HD4670, 2GB RAM.
Devices (for testing pruposes): Prof 7301, Prof 7500, TBS6980 Dual tuner, TeVii S470, TeVii S660, TwinHan 1020 Blue, AverMedia 007 DVB-T ... and many other old AnalogTV Cards...

- Sorry for my bad English! :(

Re: channels are shown as FTA, when realy the channel have e

#3
In both programs has been scanned at the same time, and correctly reported by SmartDVB, this channels have encrypted, however ProgDVB report the channels is open.

For me, if a channel carries ECM / EMM is because it is encrypted, do not know where ProgDVB looks the channel is open ...
ts_bet_enc_example.png
PC: Windows 7 x64, PIV 3.00 Ghz, ATI HD4670, 2GB RAM.
Devices (for testing pruposes): Prof 7301, Prof 7500, TBS6980 Dual tuner, TeVii S470, TeVii S660, TwinHan 1020 Blue, AverMedia 007 DVB-T ... and many other old AnalogTV Cards...

- Sorry for my bad English! :(

Re: channels are shown as FTA, when realy the channel have e

#4
Don't get that bird here, so I can't really test.

Anyway, finding an ECM alone does not prove, a station is scrambled (at that moment).
Some PayTV stations have open time slots, but don't disable their ECM then.
Others carry an ECM, just to make believe some receivers with subscriber cards inside (or embedded CA), it was scrambled, though in fact being transmitted in clear.
This is why there also is a tag on each station, telling if scrambled or not (true or not...).
ProgDVB also reads that tag.
Falsely set tags can be changed by the user from channel props. In case also set station to not update.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!



I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!


1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

Re: channels are shown as FTA, when realy the channel have e

#5
I'm not sure this is a good idea. Moreover, not only occurs on Astra 23.5 º E, occurs in more satellites / platforms. The other DVB programs if they identify correctly if the channel is open / closed ...

Anyway, I have already reported the problem, if you can do something to fix it would be nice.
PC: Windows 7 x64, PIV 3.00 Ghz, ATI HD4670, 2GB RAM.
Devices (for testing pruposes): Prof 7301, Prof 7500, TBS6980 Dual tuner, TeVii S470, TeVii S660, TwinHan 1020 Blue, AverMedia 007 DVB-T ... and many other old AnalogTV Cards...

- Sorry for my bad English! :(

Re: channels are shown as FTA, when realy the channel have e

#6
Another example:

Astra 19.2E: 12070, H, 27500 QPSK. For me, report these channels are open in ProgDVB. Try in another DVB Software, or check the ECM's.

The PMT (0x0064) says the channel have CA.... :wink:

Where find ProgDVB, this? :roll:

I just want to help, not criticize.. :D
PC: Windows 7 x64, PIV 3.00 Ghz, ATI HD4670, 2GB RAM.
Devices (for testing pruposes): Prof 7301, Prof 7500, TBS6980 Dual tuner, TeVii S470, TeVii S660, TwinHan 1020 Blue, AverMedia 007 DVB-T ... and many other old AnalogTV Cards...

- Sorry for my bad English! :(

Re: channels are shown as FTA, when realy the channel have e

#8
BTW, as I am working under Win98SE right now for some technical reason, I've just tried ProgDVB 4.81.4 on that transponder 19.2°E 12070H, and all stations scan in as scrambled, except of several data channels there.
On a pretty old scan, half of the Premiere channels where listed as green / free there, which was normal then.
Same goes for several other old version I've just tested moments ago.

Will counter check that transponder under 2000 or XP with more modern versions, once I find the time.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!



I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!


1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

Re: channels are shown as FTA, when realy the channel have e

#9
You are right, this channels show as encripted, except Blue Movie* and data channels...
This example is no good.

*Blue Movie* show it in another dvb software, are crypted....
PC: Windows 7 x64, PIV 3.00 Ghz, ATI HD4670, 2GB RAM.
Devices (for testing pruposes): Prof 7301, Prof 7500, TBS6980 Dual tuner, TeVii S470, TeVii S660, TwinHan 1020 Blue, AverMedia 007 DVB-T ... and many other old AnalogTV Cards...

- Sorry for my bad English! :(

Re: channels are shown as FTA, when realy the channel have e

#10
BTW, ProgDVB 6 versions don't find anything on transponder or full scan over here.
So no test results for those now :?
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!



I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!


1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>