Hi all ,
i want to know the way to backup my channel after i edit it with channels names and sorting as i like because it will be very annoying every time i install ProgDVB or reinstall my windows i will have to reedit all channels again....
also if there any 3rd party software that i can use to edit the channel list i wish that you give it to me...
thanks a lot and waiting your help...
Re: Backup Channel List...
#3SiLencer wrote:just make a copy of the ´channels´ folder ..thats it ...
Thanks a lot i will try it ....
Tevii S420 - Windows 7 64-bit
Re: Backup Channel List...
#4You may as well want to keep a copy of your "DiseqTree.ini" and in case "ProgDVB.ini", to safe your settings.
Or just copy the whole folder structure, of course without the "Record" subfolder.
Or just copy the whole folder structure, of course without the "Record" subfolder.
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Re: Backup Channel List...
#5Juergen wrote:You may as well want to keep a copy of your "DiseqTree.ini" and in case "ProgDVB.ini", to safe your settings.
Or just copy the whole folder structure, of course without the "Record" subfolder.
if i copied the whole folder from program file will i be able to use it without installing it again ??? as a portable ??
Tevii S420 - Windows 7 64-bit
Re: Backup Channel List...
#6Well, such a copy won't register codecs automatically, nor would it bring hardware drivers.
And record paths may be an issue, as normally you would not want to record to a portable drive, and perhaps neither to a system drive like C:
For me, using a tuner with hardware decoder, ProgDVB in fact works portable like for years now.
I have three windows installations on my system, 98SE, 2000 and XP, and I am sharing many applications between them.
But this requires strict compatibility, of course, often does not allow to use the latest versions (any more).
And record paths may be an issue, as normally you would not want to record to a portable drive, and perhaps neither to a system drive like C:
For me, using a tuner with hardware decoder, ProgDVB in fact works portable like for years now.
I have three windows installations on my system, 98SE, 2000 and XP, and I am sharing many applications between them.
But this requires strict compatibility, of course, often does not allow to use the latest versions (any more).
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Re: Backup Channel List...
#7Thanks a lot for your help and i suggest that ProgDVB team can release a small tool that help us to take backup of plug-ins and channel folders for beginner users ...
Tevii S420 - Windows 7 64-bit
Re: Backup Channel List...
#8Code: Select all
backup of plug-ins and channel folders for beginner users ...
and there is already a special tool for this ....called windows explorer ...
Re: Backup Channel List...
#9SiLencer wrote:this is like making a copy of any other folder on your harddisk ...just drag and drop ...Code: Select all
backup of plug-ins and channel folders for beginner users ...
and there is already a special tool for this ....called windows explorer ...

Tevii S420 - Windows 7 64-bit
Re: Backup Channel List...
#10I'm olso interested in backup channel list just because i would like to "test" a longer range frequency to see if i can catch more channel.I use laste Progdvb version and the channel folder is empty.Any idea on how to do the backup?MoHaMeDYoUsRi wrote:SiLencer wrote:just make a copy of the ´channels´ folder ..thats it ...
Thanks a lot i will try it ....
Thank's
Helen
