Problems with Prog 6.45

marec

Problems with Prog 6.45

#1 by marec

Hi, I tried the 6.45 version, and have some problems with it.
First, the Digital Terrestrial Tv scan frequencies will not find the Brazil´s channels;
second, the Cyberlink demultiplex is gone, it used to be the best here;
three, the audio is jumping in AAC+, on-off til it crashes Progdvb.
Will keep testing. Thanks.

Re: Problems with Prog 6.45

#2 by Prog

1. What freq. table you select?
2. I am recommend use divx AAC codec.

rufio

Re: Problems with Prog 6.45

#3 by rufio

Hello,

after updating from 6.44 to 6.45 the channel search is not working anymore (shows 0 of 0 transponders)

if I install 6.44 the software asks for the right transponder list which is in my case "KabelBW" (41 transponders); if I install 6.45 I don't get asked for the correct transponder list and it trys to scan 149 transponders finding just very few channels.

I stepped back to version 6.44

Best regards,
rufio

-----------------------------------------------------
TT Premium C2300 in soft mode, DVB-C (KabelBW),

Re: Problems with Prog 6.45

#4 by Prog

C2300 in Brazil?

ps: You can select list in settings->providers

rufio

Re: Problems with Prog 6.45

#5 by rufio

Sorry,

I'm not the original poster from Brazil but from Germany:-), just experienced a similar issue with 6.45 and the change in the transponder tables.

Regards
rufio

Re: Problems with Prog 6.45

#6 by Prog

You can change in same place like in old version. Settings->Diseq and providers.

marec

Re: Problems with Prog 6.45

#7 by marec

To Brazil, I used the All.6MHz list to scan, but i saw it is a little crazy: it´s not stepping 6MHz: 500 - 506 -514??? etc. Furthermore, the brazilian channel center frequencies are all integer odd (ends 1-3-5-7-9).
Tested a little more with 6.45 but desisted, too many crashes, even in MPEG2.

Doman

Re: Problems with Prog 6.45

#8 by Doman

marec wrote:the Cyberlink demultiplex is gone, it used to be the best here

I experience the same with 6.45
The Cyberlink demultiplexer is removed, it is replaced with the 'Prog' demultiplexer?

rufio wrote:after updating from 6.44 to 6.45 the channel search is not working anymore (shows 0 of 0 transponders)

if I install 6.44 the software asks for the right transponder list which is in my case "KabelBW" (41 transponders); if I install 6.45 I don't get asked for the correct transponder list and it trys to scan 149 transponders finding just very few channels.

I stepped back to version 6.44

I have the exact same problem.
I can not use my own created transponder list for DVB-C (Ziggo) here in Holland.
Version 6.44 works good, 6.45 is not usable like this.

Prog wrote:You can change in same place like in old version. Settings->Diseq and providers.

When i choose Settings/Provider no transponder/providerlist can be selected.
I only have this choice:

The TS-list format has changed?

Using TechnoTrend 1501C/Terratec Cinergy C1200/PCI-HD with Dutch Cable (Ziggo)

Re: Problems with Prog 6.45

#9 by Prog

1. I can return Cyber demux. But is it really work on your PC? I am not have no one good report about that.
2. Yes, current version not support old list. Can you send me you list of transponder?

ps: ProgDVB support network search and important found only first transponder.

marec

Re: Problems with Prog 6.45

#10 by marec

For me, with H264 and AAC+, the codecs used in brazilian HD tv, Cyberlink was ok.
Brazil has 6,000 municipalities, in 2016 all will go digital, so this kind of list will be a little big...
Fortunally, only 70 channels, all in UHF band.

Doman

Re: Problems with Prog 6.45

#11 by Doman

Prog wrote:1. I can return Cyber demux. But is it really work on your PC? I am not have no one good report about that.

I only recently discovered the Cyberlink Demuxing option was available but it seems to work good, it was not available in older versions of ProgDVB?
Cyberlink codec generally works very good, specially for H264
Why remove the option and not give the user the choice of using Cyberlink demux option anymore?

Prog wrote:2. Yes, current version not support old list. Can you send me you list of transponder?

ps: ProgDVB support network search and important found only first transponder.

Ok, that explains it can not find the old custom TS list.
I created a working TS list.txt for my cable region using the new example TS list.
This works OK after some trial and error:

But some problem exist:
PC1 using XP SP2 and TechnoTrend 1501C no channels are found with Prog 6.45 ?
Using same system with Prog 6.44 all channels are ok.

PC2 using XP SP3 with Terratec Cinergy 1200C and TechnoTrend CT3650 with Prog 6.45 all channels are found ok.
This is a strange problem, i will try to test more later.
Something is different in version 6.44 and 6.45?

I include my current TS list for my cable region, but different TS lists are needed for various cable regions in Netherlands.

Ziggo-West Cable TS list for Dutch Ziggo Cable (Multikabel, Casema and @Home regions)
\ProgDVB\Transponders\CabFiles\list.txt

Code: Select all

region:Netherlands
city:Ziggo West (Casema/Multikabel)
162000,6875, 64-QAM
170000,6875, 64-QAM
308000,6875, 64-QAM
316000,6875, 64-QAM
324000,6875, 64-QAM
332000,6875, 64-QAM
340000,6875, 64-QAM
348000,6875, 64-QAM
356000,6875, 64-QAM
364000,6875, 64-QAM
372000,6875, 64-QAM
380000,6875, 64-QAM
388000,6875, 64-QAM
396000,6875, 64-QAM
404000,6875, 64-QAM
412000,6875, 64-QAM
420000,6875, 64-QAM
428000,6875, 64-QAM
436000,6875, 64-QAM
444000,6875, 64-QAM
452000,6875, 64-QAM
460000,6875, 64-QAM
468000,6875, 64-QAM
474000,6875, 64-QAM
476000,6875, 64-QAM
490000,6875, 64-QAM
514000,6875, 64-QAM
546750,6875, 64-QAM
562000,6875, 64-QAM
562750,6875, 64-QAM
570750,6875, 64-QAM
578000,6875, 64-QAM
578750,6875, 64-QAM
586000,6875, 64-QAM
586750,6875, 64-QAM
626750,6875, 64-QAM
634750,6875, 64-QAM
642750,6875, 64-QAM
658750,6875, 64-QAM
666750,6875, 64-QAM
682750,6875, 64-QAM
706750,6875, 64-QAM
714750,6875, 64-QAM
722750,6875, 64-QAM
762750,6875, 64-QAM
770000,6875, 64-QAM
794750,6875, 64-QAM
826000,6875, 64-QAM
826750,6875, 64-QAM
834000,6875, 64-QAM

region:Netherlands
city:Ziggo Oost (@Home)
137500,6875, 64-QAM
148000,6875, 64-QAM
158000,6875, 64-QAM
168000,6875, 64-QAM
184750,6875, 64-QAM
185000,6875, 64-QAM
236500,6875, 64-QAM
245000,6875, 64-QAM
247000,6875, 64-QAM
255000,6875, 64-QAM
257000,6875, 64-QAM
263000,6875, 64-QAM
265000,6875, 64-QAM
271000,6875, 64-QAM
273000,6875, 64-QAM
279000,6875, 64-QAM
281000,6875, 64-QAM
287000,6875, 64-QAM
289000,6875, 64-QAM
295000,6875, 64-QAM
297000,6875, 64-QAM
305000,6875, 64-QAM
313000,6875, 64-QAM
321000,6875, 64-QAM
323000,6875, 64-QAM
329000,6875, 64-QAM
331000,6875, 64-QAM
337000,6875, 64-QAM
339000,6875, 64-QAM
345000,6875, 64-QAM
347000,6875, 64-QAM
353000,6875, 64-QAM
355000,6875, 64-QAM
356000,6875, 64-QAM
361000,6875, 64-QAM
363000,6875, 64-QAM
364000,6875, 64-QAM
369000,6875, 64-QAM
371000,6875, 64-QAM
372000,6875, 64-QAM
377000,6875, 64-QAM
380000,6875, 64-QAM
385000,6875, 64-QAM
388000,6875, 64-QAM
393000,6875, 64-QAM
396000,6875, 64-QAM
401000,6875, 64-QAM
402000,6875, 64-QAM
404000,6875, 64-QAM
409000,6875, 64-QAM
412000,6875, 64-QAM
412500,6875, 64-QAM
417000,6875, 64-QAM
420000,6875, 64-QAM
423000,6875, 64-QAM
425000,6875, 64-QAM
428000,6875, 64-QAM
433500,6875, 64-QAM
436000,6875, 64-QAM
444000,6875, 64-QAM
452000,6875, 64-QAM
454000,6875, 64-QAM
460000,6875, 64-QAM
462000,6875, 64-QAM
474750,6875, 64-QAM
482000,6875, 64-QAM
490000,6875, 64-QAM
498750,6875, 64-QAM
506000,6875, 64-QAM
538000,6875, 64-QAM
538750,6875, 64-QAM
546000,6875, 64-QAM
551500,6875, 64-QAM
554000,6875, 64-QAM
562000,6875, 64-QAM
562750,6875, 64-QAM
578000,6875, 64-QAM
578750,6875, 64-QAM
586000,6875, 64-QAM
586750,6875, 64-QAM
610000,6875, 64-QAM
618000,6875, 64-QAM
618750,6875, 64-QAM
620000,6875, 64-QAM
626000,6875, 64-QAM
628000,6875, 64-QAM
629750,6875, 64-QAM
634000,6875, 64-QAM
642000,6875, 64-QAM
642750,6875, 64-QAM
650000,6875, 64-QAM
658000,6875, 64-QAM
658750,6875, 64-QAM
660000,6875, 64-QAM
662000,6875, 64-QAM
666000,6875, 64-QAM
674750,6875, 64-QAM
682000,6875, 64-QAM
682750,6875, 64-QAM
690750,6875, 64-QAM
691500,6875, 64-QAM
709000,6875, 64-QAM
714000,6875, 64-QAM
717000,6875, 64-QAM
730000,6875, 64-QAM
738000,6875, 64-QAM
754000,6875, 64-QAM
762000,6875, 64-QAM
764000,6875, 64-QAM
770000,6875, 64-QAM
778000,6875, 64-QAM
782000,6875, 64-QAM
794000,6875, 64-QAM
802750,6875, 64-QAM
810000,6875, 64-QAM
811750,6875, 64-QAM
818000,6875, 64-QAM
820000,6875, 64-QAM
826750,6875, 64-QAM
828000,6875, 64-QAM
831500,6875, 64-QAM
842000,6875, 64-QAM

region:Netherlands
city:Ziggo Gorredijk (256-QAM)
297000,6875, 256-QAM
305000,6875, 256-QAM
313000,6875, 256-QAM
321000,6875, 256-QAM
329000,6875, 256-QAM
337000,6875, 256-QAM
345000,6875, 256-QAM
353000,6875, 256-QAM
361000,6875, 256-QAM
369000,6875, 64-QAM
377000,6875, 256-QAM
385000,6875, 256-QAM
393000,6875, 256-QAM
401000,6875, 256-QAM
409000,6875, 256-QAM
417000,6875, 256-QAM
425000,6875, 256-QAM
610000,6875, 256-QAM
618000,6875, 256-QAM
642000,6875, 256-QAM
650000,6875, 256-QAM
754000,6875, 256-QAM
762000,6875, 256-QAM
794000,6875, 256-QAM
810000,6875, 256-QAM
818000,6875, 256-QAM

Last edited by Doman on Sun Jul 18, 2010 12:47 pm, edited 1 time in total.

Re: Problems with Prog 6.45

#12 by Prog

1. return in next version.
2. "All. 6875 64qam" not good for you?

Doman

Re: Problems with Prog 6.45

#13 by Doman

Prog wrote:2. "All. 6875 64qam" not good for you?

No, not working good.
"All. 6875 64qam" can only find very few channels.
Dutch cable (Ziggo) here using many non-standard frequencies i think.
It is not a problem creating custom TS list in the new format.

Re: Problems with Prog 6.45

#14 by Prog

Problem. Because after installation ProgDVB update file to self.

marec

Re: Problems with Prog 6.45

#15 by marec

Installed version 6.45.1 and it is much more unstable than version 6.42.6 for example, to compare.
Navegating in channells it crashed windows or freezed Progdvb too, specially with weak signals.

Display posts from previous

Sort by