Hello,
i have a TT-3200. TT-Line Premium (s) KS drivers; Windows XP Pro.
Scanning this transponder does not show some channels.
Should be some S2 channles like: Das Erste HD; Arte HD and others
I have Einfestival HD on 11362000H.
Any ideas?
Regards
Re: Not able to find S2 Channels transponder 11362000H on As
#2Did you read the Version Comparison on the Download page?
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Re: Not able to find S2 Channels transponder 11362000H on As
#3It is a bit unclear for me what card you have. TT-3200 supports DVB-S2 while the Premium ones do not support this. But they are totally different cards...
So which card do you have from the TT site? http://www.tt-pc.com/2762/PRODUCTS_for_PC.html
And also as Juergen said only ProgDVB Pro supports DVB-S2.
So which card do you have from the TT site? http://www.tt-pc.com/2762/PRODUCTS_for_PC.html
And also as Juergen said only ProgDVB Pro supports DVB-S2.
| WinXP SP3 or Win10 1709 | i5 660@3.33Ghz | 4 Gb RAM | ATI Radeon HD 5450 1Gb|
| TT S2-3200 | TT 1501| Astrometa| TT Infrared Receiver| Octagon SF4008 for streaming to ProgDVB|
| Prog demux |
| VMR7 | CyberlinK video decoder (MPEG2) and FFDShow for H264 - DXVA enabled |
| ProgAR | FFDShow audio | Audio processor enabled |
| Timeshift in RAM | Buffer size 2000 |
| TT S2-3200 | TT 1501| Astrometa| TT Infrared Receiver| Octagon SF4008 for streaming to ProgDVB|
| Prog demux |
| VMR7 | CyberlinK video decoder (MPEG2) and FFDShow for H264 - DXVA enabled |
| ProgAR | FFDShow audio | Audio processor enabled |
| Timeshift in RAM | Buffer size 2000 |
Re: Not able to find S2 Channels transponder 11362000H on As
#4Hello,
of course i have bought and installed the pro version.
I have a TT budget S2-3200 card. Sorry, i have a TT-Premium S-2300 in this machine as well.
This card does not support S2, i know. For DVB-S2 i am using the TT-S3200 BDA drivers.
Einsfestival HD is being broadcasted an found on the same transponder but Das Erste HD or other
channels are not found.
Regards and thank you!
of course i have bought and installed the pro version.
I have a TT budget S2-3200 card. Sorry, i have a TT-Premium S-2300 in this machine as well.
This card does not support S2, i know. For DVB-S2 i am using the TT-S3200 BDA drivers.
Einsfestival HD is being broadcasted an found on the same transponder but Das Erste HD or other
channels are not found.
Regards and thank you!
Re: Not able to find S2 Channels transponder 11362000H on As
#5You can test BDA and WDM drivers. Also check Settings->Device options. Must be technorend selected.
Re: Not able to find S2 Channels transponder 11362000H on As
#7I have got the same issues with ProgDvb 6.60 Pro 32 Bit. All HD channels went black. After a rescan they had disappeared. I use a WinTv Nova HD S2 and my Device seetings are set to "Hauppauge". Any hints?
Br, phaze75.
Br, phaze75.
Re: Not able to find S2 Channels transponder 11362000H on As
#8Do you have signal on this transponder?
Re: Not able to find S2 Channels transponder 11362000H on As
#9Yes, see attached screenshots. However, pressing "Scan" does not deliver any results:
I have the same issues with other transponders, e.g. 11303 H, which should deliver "ORF HD" channels (see http://goo.gl/4m03K):
It used to work flawless with earlier versions.
Re: Not able to find S2 Channels transponder 11362000H on As
#10Do you select correct type of LNB?
Try set rolloff to auto
Try set rolloff to auto
Re: Not able to find S2 Channels transponder 11362000H on As
#11Updating to 6.60.02:
All channels went black. Changing device settings from "technotrend" to "Microsoft compatible BDA driver"
the SD channels brighton back up. I cannot open any of the HD i had before. EPG works.
Regards
All channels went black. Changing device settings from "technotrend" to "Microsoft compatible BDA driver"
the SD channels brighton back up. I cannot open any of the HD i had before. EPG works.
Regards
Re: Not able to find S2 Channels transponder 11362000H on As
#12Hello,
i still have not found a solution for this issue.
Anone any idea? This is a common card!
Setting rolloff to auto did not help.
Regards
i still have not found a solution for this issue.
Anone any idea? This is a common card!
Setting rolloff to auto did not help.
Regards