the progdvb pro 6.65 not work good with diseq 4*1 !
ex.
work good with sat 1 in port 1
but other port 2 , port 3 , port 4
some time ex .
when change in sat 2 port 2 from chanel to channel V to H or H to V
the signal is loss no level no quality.

my dvbs card tevii s 464
windows 7 x64 sp1
thank you wait the help !

Do you have same problem on old versions of ProgDVB?

Prog wrote:Do you have same problem on old versions of ProgDVB?

yes all versions and iam test more then on type of diseq 4*1 same problem !

Please check settings. Must be selected bda.device in TV Sources and tevii in Settings->Device options

Prog wrote:Please check settings. Must be selected bda.device in TV Sources and tevii in Settings->Device options

iam not used port 1 now port 1 for other dish with motor

port 2 : nilesat 7w
port 3 : eutelsat 7e
port 4 : hotbird 13 e

any help ?

I am not have problem on my s660 (same tuner). Please check Settings->Device options.

Prog wrote:I am not have problem on my s660 (same tuner). Please check Settings->Device options.

i have 2 s464 and s660 usb but i not test on s660 !
but in settings device option used ( tevii )
when try change delay of diseq solve the problem ?

iam try
how many time to repeat diseqc command = 4
delay between diseqccommands = 400

i think this best !

Prog wrote:I am not have problem on my s660 (same tuner). Please check Settings->Device options.

i think the problem show with you if ex.
used diseqc ! as example.
sat 1 = hotbird 13e
sat 2 = astra 19e
when change the any sat ex. sat 1 to eutelsat 7E as example.
and not install again the progdvb this problem happend !
i think any change of sat. need uninstall the progdvb then install it again ?

switch not implement commands from ProgDVB. May be cable too long.

Prog wrote:switch not implement commands from ProgDVB. May be cable too long.

cable 20 m and i have 2 dish
1-no motor dish 120 cm 3 sat (nilesat 7w-eutelsat 7e-hotbird 13e)
2-dish with motor 180cm motor 24 inch. get from ( 30W to 57E )

i have recived 4 sat at the same time.
when change the sat 1 with motor .
and change in progdvb remove old sat from diseqc the old file of sat not deleted in ( folder Channels )in progdvb.
when not install progdvb again ( the problem when change from channel to other loss in signal no signal L or Q .
when uninstall the progdvb and install again no any problem .
the progdvb pro 6.65
o.s windows 7 ultimated x64 sp2
LNB Truman HD 2 output
diseqc 4*1 TW ZADA
dvbs card tevii s464

Do you install to new directory and scan channels again?

no in the same direction.
windows 7 in C
the progdvb in C:/progdvb

now try change sat1 by motor
and change in diseqc.
the problem is happend again.
the progdvb now need reinstall.

the old file of astra 23.5E stell in progdvb folder ( Channels )
but iam remove from
Settings > tv source > switch 4*1 ( remove old sat in port 1 then add astra 19.2E as new sat )
and select
channel list > Remove Channel from bas > select the astra 23.5 ( old sat )
then delete the Tap of astra 23.5E ( old sat ) by
Channel list > Delete ( BUT STELL OLD FILE IN Channels Folder )

[ChannelTreeCollection]
Count=7
name1=CL-d81c5601-4bc4-4e0c-b1fc-7d1eb86c5e8f.tree
name2=CL-d5c16ee8-f71d-4569-a3e9-6e4af1bca69c.tree
name3=CL-67d91602-7ab1-49a6-a1ad-f27b958ced0f.tree
name4=CL-71d70453-8367-4c87-a915-6e38f11b116a.tree
name5=CL-cb678919-f24e-481d-b700-f2f7efc87131.tree
name6=YouTube.list
name7=MostPopular.tree


this old

stell found

CL-347ec70e-9590-4bd6-be8a-b732d4f6c2c5.tree

now need reinstall the progdvb to solve the problem !