Has anybody encountered the same problems? I have updated my Vista Ultimate and have the newest beta drivers for the Terratec Card.
I get 100% Signal strength but no Quality strength.
I'm using the newest Progdvb.
I can find the most channels on my XP Installation with ProgDVB, and on my DVB-C Receiver.
Waiting for help!
Greetings
#2
No ideas how to solve my problem, yet?
Now I've tried the original software Terratec Home Cinema - it finds all the channels with Vista as OS!!!
I've also tried progDVB 5 but again, NO CHANNELS!
Please could anybody come up with an idea? I'm really frustrated at the moment...
Thanks in advance
Now I've tried the original software Terratec Home Cinema - it finds all the channels with Vista as OS!!!
I've also tried progDVB 5 but again, NO CHANNELS!
Please could anybody come up with an idea? I'm really frustrated at the moment...
Thanks in advance
#3
For me this looks like some kind of driver trouble, which the original software might already know to handle...
Try with manual transponder scanning, use the same frequencies and parameters as the original soft does. Maybe ProgDVB does not have a suitable transponder list, if so, use your editor.
BTW, is it a BDA driver your card uses?
If so, what is the full name of the BDA device in ProgDVB?
Try with manual transponder scanning, use the same frequencies and parameters as the original soft does. Maybe ProgDVB does not have a suitable transponder list, if so, use your editor.
BTW, is it a BDA driver your card uses?
If so, what is the full name of the BDA device in ProgDVB?
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
#4
Honestly, that's exactly what I tried after my last post!
Yes, the solution is to scan the known transponders manually. The channels I found didn't appear automatically in the channel list, so I had to creat a new folder - et voila!
Yes, the solution is to scan the known transponders manually. The channels I found didn't appear automatically in the channel list, so I had to creat a new folder - et voila!