jaffo wrote:Sorry one other thing: when I scan, if the rotor is not at the position of the satellite I am scanning the dish will move but the scanning starts before the dish has finished moving so you loose the first few transponders or get a faults scan from a nearby satellite.
Thats an old problem of Progdvb. Necessary waits are not regarded.
1 - Antenna is yet not in position, but scanning starts and goes on;
2- Diseqc command and time to switch settel not observed, scanning goes on;
3- The same above for tuning, immediate tuning, no switch, card processing and lnb power up necessary delays observed;
4- Multiple tunnings, sometimes up to 5 consecutive tunnings, but all useless if delays above not made.
