How do i get perfect SDTV codecs working with this for free?
How do you record in this with stability(without crashing?)
#2
Depends, for example on your VGA card.
Some VGA cards provide hardware support, more or less. And some codecs may then benefit from that. Normally these are the codecs, the VGA cards manufacturer buys for his (retail) software packages.
As the amount / quality of HW support differs very much from one VGA card to the other, there's no general solution -> perfect codec for all.
Besides of that, of course even good codecs may come with limitations, like those for DVD players, that don't have to be able to automatically change aspect ratio or data rate at run time, as the DVD source can and would only reset and re-initiate or even change the codec at any track or at least chapter change. This means, it may be impossible, to force AR changes, when the DVB video source would need this due to transmission changes.
Same goes for audio, of course.
Basically, most codecs aren't freeware at all, normally come with other software. Often codec packs are not just built without care for system stability, but also use stolen components.
So best to do is, find just one (for a purpose) and copy and register manually.
Some VGA cards provide hardware support, more or less. And some codecs may then benefit from that. Normally these are the codecs, the VGA cards manufacturer buys for his (retail) software packages.
As the amount / quality of HW support differs very much from one VGA card to the other, there's no general solution -> perfect codec for all.
Besides of that, of course even good codecs may come with limitations, like those for DVD players, that don't have to be able to automatically change aspect ratio or data rate at run time, as the DVD source can and would only reset and re-initiate or even change the codec at any track or at least chapter change. This means, it may be impossible, to force AR changes, when the DVB video source would need this due to transmission changes.
Same goes for audio, of course.
Basically, most codecs aren't freeware at all, normally come with other software. Often codec packs are not just built without care for system stability, but also use stolen components.
So best to do is, find just one (for a purpose) and copy and register manually.
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
#3
I have a 8800GTS 320MB
"So best to do is, find just one (for a purpose) and copy and register manually."
Could you choose one for me please
So i can also do schedule recording and one which is not a trial and works without a problem
What one are u using with progdvb; if u r using progdvb?
"So best to do is, find just one (for a purpose) and copy and register manually."
Could you choose one for me please
So i can also do schedule recording and one which is not a trial and works without a problem
What one are u using with progdvb; if u r using progdvb?
#4
I am using my Nexus in hardware mode normally, no codecs then.
Else I am using Cyberlink DTV, as this one cooperates with my ATI RADEON 9250 quite well, and it came with my DVB-T stick.
Yours seems to be an nvidia, so perhaps look for their codecs.
Else I am using Cyberlink DTV, as this one cooperates with my ATI RADEON 9250 quite well, and it came with my DVB-T stick.
Yours seems to be an nvidia, so perhaps look for their codecs.
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
#5
Could u please send me the url for nvidia codec please.
I have tried but its not working
Is Progdvb free?
I have tried but its not working
Is Progdvb free?
#6
Look into the manual or CD for your VGA card or computer system.
If you don't have can't or find it, check at nvidia.com
But why do I have to tell you that?
This is a place just for ProgDVB, not for bloody beginners' first steps in general computing...
Regarding free or not, please start to read here:
http://progdvb.com/
As most codecs are not free, I will not provide download links.
But using Google is for free...
What's the matter with you?
Try basic DIY thinking, please...
Breast feeding not available from here
If you don't have can't or find it, check at nvidia.com
But why do I have to tell you that?
This is a place just for ProgDVB, not for bloody beginners' first steps in general computing...
Regarding free or not, please start to read here:
http://progdvb.com/
As most codecs are not free, I will not provide download links.
But using Google is for free...
What's the matter with you?
Try basic DIY thinking, please...
Breast feeding not available from here

My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>