Hello,
I have Nexus DVB-S working fine on a Pentium 4C 2.4GHz with AGP graphic card Radeon 9500Pro and Asus P4P800 motherboard.
Now I have a new computer with ASUS P5K-E motherboard, Core2Quad 2.4GHz and Radeon HD3870 graphic card.
My problem is I can't have see nothing when installin driver Technotrend 2.19C and ProgDVB 5.14.08
When I move the ProgDVB window on the desktop I can see freeze picture of the channel
Can you help me ? Is there a incompatibily that I don't know ?
Thanks?
#2
Activate device option software scaling.
If this does not help:
Make sure to use the KS driver.
Set up and adjust the original application first, to do the necessary codec settings for the forced software decoding for the PC screen.
Yes, there is a well known incompatibility with PCI-e and SS1 cards' hardware video overlay. That's why Technotrend made the PCI-e special drivers.
If this does not help:
Make sure to use the KS driver.
Set up and adjust the original application first, to do the necessary codec settings for the forced software decoding for the PC screen.
Yes, there is a well known incompatibility with PCI-e and SS1 cards' hardware video overlay. That's why Technotrend made the PCI-e special drivers.
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>