progdvb.com

Please try again select divx. Also try change audio renderer for divx.
audio codec not depended from PC. If working on my PC then must work on your (on same channel)

The latest version of ac3filter supports aac decoding. Try it.

I cant find any x64 HE-AAC decoders and x86 progdvb wont work with my tuner and x64 progdvb has another problem when AC3 is available it still says its AAC.

I am recommend try to fix ProgDVB x32... What message you have?

No error messages it just cant change the frequency the tuners are set to so it only gets the channels for the last frequency the tuner was using then when I scan another frequency it returns the channels on the last frequency.

It seems like the 32bit software has trouble interfacing with the hardware on a 64bit os.

No. Lot of users have x64 and my main PC is x64. It is not problem.
But every DVB driver have self specific. You can try change Settings->Device options.

I figured it out I just unchecked Use ITunerRequest and it works!

Theres another problem, the EVR renderer wont work.

This render request .net 3.x and modern video card.

I have .net 4 on windows 7 x64 and an nvidia GTX580, everything else works with EVR.

EVR works on the x64 version but not x86.

.net 4 not including .net 2.0-3.5. So you have to install it too.

7 has all .net versions by default up to 3.5.

Do you have problem with both EVR modes? Not custom EVR good working on most PC. I am not know problems with it.

EVR has always worked just fine, maybe you should include the exception message in the message box that says "This renderer not supported. Changed to VMR", it should say "This renderer is not supported" by the way.

ProgDVB have 2 EVR mode. Custom and usual. Custom can not working on some PC (depended from video driver) "usual" always working if OS support EVR. It is very simple and standard function.

ps: Try change video codec also.

Both custom and normal EVR will not work and I have tried several 264 decoders.

It seems I do have a problem with the 32bit EVR.