Display posts from previous
Sort by

Some channels doesn't work with progdvb

#1 by dr_nazy
i'm using progdvb v 5.15.3.0
it works very good but when i did the channel scan some channels from Nilesat 101/102 didn't appear in the list
then i downloaded a channel list and installed it these cahnnels came out in the list but didn't work
i tried ading them by frequency but the prog didn't find them
what should i do
i have a Twinhan 1027

#3 by dr_nazy
yes it had good signal
when i added the frequency of the channel and the prog scanned it
,it found 17 already present channels but not the missing channels

#4 by Juergen
No idea on Nile, but some stations may only be available temporarily.
Also check your channel list props to show all kinds of signals, as missing video IDs may lead to interpretation as Radio, missing Audio gives a Data channel.
Even this may be changing temporarily.

Do you have another software to compare with?

And, of course, the usual places for channel listings, like satcodx or lyngsat, may be partly outdated.
Holiday season, everywhere many people are out or just sitting in the pool...
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#7 by dr_nazy
it didn't work
i used other programms like alt dvb and my teatre and the same problem occured,so it isn't progdvb's problem
could it be my dvb card or my lnb
i have no idea
any way i can't thank you enough for your help
thanks

#8 by Frozen
What transporder/channels . I can check them if u want 8)
OS : Win XP SP2
CPU : P4 Intel 3.00 GHz "HT"
Memory : 2 GB
DVB-S : Sky Star 2 (2.6D) ( 4.4.0 )
Hotbird 13.0°E | Badr-3/4 26.0°E | Nilesat 101/102 7.0°W

#9 by dr_nazy
it would be great
11765 MHz Horz 27500 SR
channel name : melody aflam
sat:Nilesat 101/102

12034 MHz Horz 27500 SR
channel name: Rotana cinema
same sat

#10 by Frozen
Tested . both channels work perfectly on different versions .

what about channels like Al Mishkat , Iqraa !
OS : Win XP SP2
CPU : P4 Intel 3.00 GHz "HT"
Memory : 2 GB
DVB-S : Sky Star 2 (2.6D) ( 4.4.0 )
Hotbird 13.0°E | Badr-3/4 26.0°E | Nilesat 101/102 7.0°W

#13 by dr_nazy
still nothing
the chanels became listed in the channels list
but not working
when i scan the transponder it finds some channels and misses some
the reciever revieves 500 channels but the dvb card recieves less than 400

#14 by Juergen
dr_nazy wrote:it didn't work
i used other programms like alt dvb and my teatre and the same problem occured,so it isn't progdvb's problem
May be, may be not.
Some devices may be quite slow on reading NIT and other tables, due to priorities, driver issues or whatever else.
Perhaps it's necessary, to set the timeout to 5000 or even more. This would only effect a few transponders, with large and / or slowly transmitted tables, or with errors on those.
Also compare with similar settings in AltDVB.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>