Page 1 of 1
Some channels doesn't work with progdvb
Posted: Fri Jul 25, 2008 12:15 pm
by dr_nazy
i'm using progdvb v 5.15.3.0
it works very good but when i did the channel scan some channels from Nilesat 101/102 didn't appear in the list
then i downloaded a channel list and installed it these cahnnels came out in the list but didn't work
i tried ading them by frequency but the prog didn't find them
what should i do
i have a Twinhan 1027
.
Posted: Fri Jul 25, 2008 12:41 pm
by Prog
Do you have signal on this transponder?
Posted: Fri Jul 25, 2008 12:54 pm
by dr_nazy
yes it had good signal
when i added the frequency of the channel and the prog scanned it
,it found 17 already present channels but not the missing channels
Posted: Fri Jul 25, 2008 2:20 pm
by Juergen
No idea on Nile, but some stations may only be available temporarily.
Also check your channel list props to show all kinds of signals, as missing video IDs may lead to interpretation as Radio, missing Audio gives a Data channel.
Even this may be changing temporarily.
Do you have another software to compare with?
And, of course, the usual places for channel listings, like satcodx or lyngsat, may be partly outdated.
Holiday season, everywhere many people are out or just sitting in the pool...
Posted: Fri Jul 25, 2008 5:35 pm
by dr_nazy
well i scanned the sat again and the prog found some of the channels but it was under "Lost Channels"
what does that mean
.
Posted: Fri Jul 25, 2008 5:41 pm
by Prog
Try set addtion delay in settings->Options->Other->scanner.
For example 1000
Posted: Fri Jul 25, 2008 8:45 pm
by dr_nazy
it didn't work
i used other programms like alt dvb and my teatre and the same problem occured,so it isn't progdvb's problem
could it be my dvb card or my lnb
i have no idea
any way i can't thank you enough for your help
thanks
Posted: Fri Jul 25, 2008 8:45 pm
by Frozen
What transporder/channels . I can check them if u want
Posted: Fri Jul 25, 2008 8:54 pm
by dr_nazy
it would be great
11765 MHz Horz 27500 SR
channel name : melody aflam
sat:Nilesat 101/102
12034 MHz Horz 27500 SR
channel name: Rotana cinema
same sat
Posted: Fri Jul 25, 2008 9:50 pm
by Frozen
Tested . both channels work perfectly on different versions .
what about channels like Al Mishkat , Iqraa !
Posted: Fri Jul 25, 2008 9:59 pm
by dr_nazy
nop
both of them are not in the list
Posted: Fri Jul 25, 2008 10:17 pm
by Frozen
Try this
h**p://
www.zshare.net/download/159650188495ce34/
(**=tt)
maybe it's Horizontal channels problem ( LNB problem I think )
Posted: Sat Jul 26, 2008 1:08 pm
by dr_nazy
still nothing
the chanels became listed in the channels list
but not working
when i scan the transponder it finds some channels and misses some
the reciever revieves 500 channels but the dvb card recieves less than 400
Posted: Sun Jul 27, 2008 4:03 pm
by Juergen
dr_nazy wrote:it didn't work
i used other programms like alt dvb and my teatre and the same problem occured,so it isn't progdvb's problem
May be, may be not.
Some devices may be quite slow on reading NIT and other tables, due to priorities, driver issues or whatever else.
Perhaps it's necessary, to set the timeout to 5000 or even more. This would only effect a few transponders, with large and / or slowly transmitted tables, or with errors on those.
Also compare with similar settings in AltDVB.