I have installed ProDVB 6.03.01, I have a KWorld DVB-T 100 PCI card the Hypermedia software supplied isn't flash.

My problem is that not all the free to air Television channels show up on ProgDVB.

The only device that scanned is {BDA} DigiGo DVBT BDA Tuner/Demod
Transponder 6: 177 - 7Mhz
Frequency 177500Khz
Symbol Rate 7000

The level in Transponder Scan is 10%
The quality in Transponder Scan is 80%

ABC, 10, 9, 7 and Digital Forty Four all show up fine with their associated HD and radio channels ..... what is missing is SBS, it's HD and radio channels.

I have the SBS data from Hypermedia

SBS
Freq 571500
Video PID 161
Audio PID 81
Bandwidth 7
Provider SBS

SBS World News
Freq 571500
Video PID 162
Audio PID 83
Bandwidth 7
Provider SBS

SBS HD
Freq 571500
Video PID 102
Audio PID 103
Bandwidth 7
Provider SBS

SBS2
Freq 571500
Video PID 161
Audio PID 81
Bandwidth 7
Provider SBS

SBS Radio 1
Freq 571500
Video PID 0
Audio PID 201
Bandwidth 7
Provider SBS

SBS Radio 2
Freq 571500
Video PID 0
Audio PID 202
Bandwidth 7
Provider SBS

Do you have this problem in scan transponder dialog?

Prog wrote:Do you have this problem in scan transponder dialog?

I'm sorry if I don't understand your question.

If I open Channel List/Scan Transponder when I am watching ABC HD I have:

level 100%
quality 68%
{BDA} DigiGo DVBT BDA Tuner/Demod
transponder 6: 177-7Mhz
frequency 226500 Khz
symbol rate 7000

Try to scan that SBS transponder manually, with the parameters you've posted.
Once being in the transponder scan dialogue, you can change frequency and other params.

Let us know about level and quality there on. Have us informed if any data are acheived from scanning there, , and stations would be added, even if you possibly don't have sound nor vision.

Details rule, even if just on procedures and failure or mishaps.

Keep in mind, we don't have the chance to test on your services from here.

I opened Channel List/Transponder Scan

Transponder C33: 570 - 8Mhz
freq 570000khz
symbol rate 8

The Scan Button remains dim, I cannot select scan.
Polarisation, Modulation, FEC, Roll Off and Pilot also remain dim.

You must push ok "lock" and after that on "scan".

ProgDVB started playing up, when I selected one station it show me the statistics for that station but played Channel 10, I re-scanned for all channels and it gave me 28 entries for Channel 10.

I deleted ProgDVB, all my Vista codecs as well as Nero 9 that started playing up around the same time and did a complete shutdown.

This morning I reinstalled ProgDVB, opened Channel List/Transponder Scan and scanned for each channel group by their individual frequency as Channel Scan/{BDA} DigiGo DVBT BDA Tuner/Demod didn't bring up one channel?

Many thanks to Prog and Juergen.

I now have all the free to air digital channels showing in ProgDVB and shall start experimenting.

The Scheduler feature only appears to have individual day programming, is there a way to input multiple days or weeks?

Current version not supported. In Future...

PS: You can try automatic scan after set some deley in Settings->Options->Other->Scanner.

Hi All,

I'm in Melbourne, Aust. and managed to get SBS and Nine going (SD, HD, etc) by manually adding them.

Using the 'scan transponder' function as suggested by the admins I entered the following frequencies, locked them in and scanned.

Nine: 191625
SBS: 536625

Hope this helps someone out there!

Also, thanks for the great software.