progdvb.com

Hi!

My english is very bad. Sorry!

I have very big problem with Prog Media Server(home).

Computer(Server): Windows 7 Home Premium x64 - ProgDVB 6.86.4 Standart x64 + Prog Media Server(home) 3.69
Conputer(Client): Windows 7 Home Premium x64 - ProgDVB 6.86.4 Standart x64 + Prog Media Client 3.40

Firewall(server & client) is OK.
Server protocol - unicast.

All work perfectly.

I can change channels on the server and all work without problem.
But after changes 2-3-5 channels and close the client, and again... and again(3-5-7 times, allways is differently) I lost picture(TV signal) on client side and ports on server is(look Control, this is flood from client!):

If click on APPLY button(without any changes) on PMS - all working again.
If change port on client side from 10999 to 11000 its work again, but client can't change channel.
If restart ProgDVB(server side) - all work again.
If block incoming port 11000 on server computer - all working again, but can't change channel.

TCP connections on server side(only ProgDVBEngineRun):
This is TCP flood from client to server. If close ProgDVB(client) the flood stops. If block all out TCP connections for ProgDVB(client) - the flood stops.

Please, help me.

Please try disable stability mode in Settings->Options->Debug

Yes... I tried. (without Stability mode in client, in server... both)

Also tried with old versions on ProgDVB.

Also x86 versions.

Also change port on the server.

Also change Packet Size.

Allways same thing.

ProgDVBEngineRun only in stability mode...

Disabled Stability mode in server and client:

Same thing.

Also tried with old versions on ProgDVB.

Also x86 versions.

Also change port on the server.

Also change Packet Size.

Allways same thing.

Is there no solution?

Anyone?

Why too many copes of ProgDVB? What you do for that?

ps: Please send me logs.

Prog wrote:Why too many copes of ProgDVB? What you do for that?

Yes. This is the question.

Logs in PM.

Prog, this is TCP connections. This is NOT separate process.

?!

ProgDVB 6.92.4(Server & Client) ... Same problem.

Send me logs from client and server of this problem.

Logs...

How I make this: Open client and change 3-4 channels. Close client. Open client again and change 3-4 channels. Close client. I make this 3-4-5 times and voila. I think this is server side problem because if I click on APPLY button into server window the server work again without problem.


P.S.: With new version(client and server) I have problem, because server streaming only ~150KB/s always(normally 500-700KB/s).

Prog, any news for my very old problem?