Page 1 of 1
Can't find channels on DVB-C
Posted: Sat Jul 12, 2014 3:43 pm
by ew_h2002
I used ProgDVB for years with my DVB-T stick. After I changed residence, I had to use DVB-C. Therefore I bought a stick with an ASTROMETA-chip. Unfortunately ProgDVB can't find any channel with it. The program can find the stick. But it only searches on DVB-T frequencies.
I learned that I can use a diversion via winamp and it's TV-plugin. But therefore I would need a list of (German) transponders. I am afraid I can't find that via Google.
Re: Can't find channels on DVB-C
Posted: Sat Jul 12, 2014 4:48 pm
by Prog
1. Try manual scanner.
2. This device very specific. Check Settings->Device options->mode and look topic on this form.
Re: Can't find channels on DVB-C
Posted: Mon Jul 14, 2014 3:03 pm
by Thex
But it only searches on DVB-T frequencies.
like here
viewtopic.php?p=62842#p62842
Re: Can't find channels on DVB-C
Posted: Tue Jul 15, 2014 5:04 pm
by ew_h2002
I tried both. When I type in a known frequence, it says there is a signal. Than I press "search" - and nothing happens. I know that a tv-station is sending right here on exactly that frequence. So what can I do to make ProgDVB remember, that there is something on this channel?
@Thex: But my one is not a stick for DVB-T+C but only for DVB-T.
Re: Can't find channels on DVB-C
Posted: Tue Jul 15, 2014 5:12 pm
by Prog
Please send me logs (Settings->Options->Debug)
Re: Can't find channels on DVB-C
Posted: Wed Jul 16, 2014 2:56 pm
by Thex
ew_h2002 wrote:@Thex: But my one is not a stick for DVB-T+C but only for DVB-T.
screenshot of Settings->TV sources?
Re: Can't find channels on DVB-C
Posted: Thu Jul 17, 2014 6:49 pm
by ew_h2002
The logfile (ExceptionReport.txt) is quite short. Hope that helps:
Code: Select all
Type: Unhandled .NET Thread Exception
Message: Es wurde versucht, im geschützten Speicher zu lesen oder zu schreiben. Dies ist häufig ein Hinweis darauf, dass anderer Speicher beschädigt ist.
Method: Int32 Engine_SetChannel(ProgDvbEngine.TSetChannelParams*)
Stack:
bei Engine_SetChannel(TSetChannelParams* )
bei ProgDvbEngine.Engine.SetChannel(Channel channel, List`1 diseqItem)
bei ProgDvbNet.MainFormHelper.ActionList_SetChannel(CSetChannelParams _params)
bei ProgDvbNet.ChList.Node.Do(ESetChildChannelMode mode, Boolean NeedSelectTreeList)
bei ProgDvbNet.ChList.ChTreeGuiControl.ClickOnChannel2(ChannelNode node, ESetChildChannelMode mode)
bei ProgDvbNet.ChList.ChTreeGuiControl.ChangeChannelClick(Point p, ESetChildChannelMode mode)
bei ProgDvbNet.ChList.ChTreeGuiControl.ChangeChannelSingleClick(Object sender, MouseEventArgs e)
bei IPDev.Skins.GUIChannelListView.OnNodeMouseClick(ChannelNodeMouseClickEventArgs e)
bei IPDev.Skins.GUIChannelListView.OnMouseUp(MouseEventArgs e)
bei System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
bei System.Windows.Forms.Control.WndProc(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Extra details:
@Thex: The screenshot is attached. Hope that helps.
Re: Can't find channels on DVB-C
Posted: Fri Jul 18, 2014 8:25 pm
by momchil
I can't find any channels with my TBS6618(DVB-C) after clear instalation to ProgDVB 7.06 and 7.06.1
64-bit versions. DVB-T still work.
Version 7.05.8 still work fine.
Re: Can't find channels on DVB-C
Posted: Sat Jul 19, 2014 5:31 am
by Prog
without tbs.ebda2?
ew_h2002: Look thread about astrometa on this forum. Very specific device.
Re: Can't find channels on DVB-C
Posted: Sat Jul 19, 2014 8:45 am
by momchil
Direct upgrade from 7.05.8x64 to 7.06.1x64: I can't play any channel and I can't find any channel.
tbs.ebda2 is deleted: I can't play any channel and I can't find any channel.
I can find channels with manual search but after clicking on OK - nothing.
With 7.06.2 x64 same problems.
7.06.2 x86(32-bit) work fine with DVB-C. Please, fix x64 version, Prog. Thank you!
Re: Can't find channels on DVB-C
Posted: Sun Jul 20, 2014 10:35 am
by momchil
Solution for this?
Re: Can't find channels on DVB-C
Posted: Sun Jul 20, 2014 11:51 am
by Prog
I am not have good idea. x32 and x64 is total same for TBS. I think different in drivers. Try update it.
Re: Can't find channels on DVB-C
Posted: Sun Jul 20, 2014 1:39 pm
by ew_h2002
ew_h2002: Look thread about astrometa on this forum. Very specific device.
At least this means, there is no solution, is it. That would be bad. Because I really love ProgDVB. I mean, I use another program right now. So I can watch TV. But it is not has comfortable and as small as ProgDVB is.
Re: Can't find channels on DVB-C
Posted: Sun Jul 20, 2014 2:17 pm
by Prog
But you still can use x86 ProgDVB. I think other application is x86?
Re: Can't find channels on DVB-C
Posted: Sun Jul 20, 2014 8:55 pm
by momchil
Prog wrote:I am not have good idea. x32 and x64 is total same for TBS. I think different in drivers. Try update it.
My driver is 1.0.0.4. This is last driver for TBS 6618.
With 7.06.3(7.06.2c) work fine.