hey there, i've an Fritzbox (6660 Cable), acting as ah DVB-C Recceiver and its reachable over Sat>Ip, have this running in like DVBViewer and TVHeadend etc...
in ProgDVB or ProgTV when i configure the Sat->IP Source, i'll enter the IP of the Fritzbox and then i can choose from the predefined dvb-c frequencies, but no matter what i choose it doesn't find anything, i'm also not really sure if its even trying to get to the fritzbox, as normally i would see dvb-c receivers on the fritzbox using it in ah tuner display menu...
i tried ProgTV mainly but also ProgDVB doesnt make ah difference, using ProgTV i'll see an "error" for split seconds when different frequencies are switched for scanning...
i would exactly now my frequencies form the provider furthermore i'm not sure if ProgDVB/TV even uses the correct settings?! didn't found ah list whats behind the predefined settings (Modulation settings etc..)
any help appreciated
best regards
Stephan
Re: How to setup FritzBox Sat>IP (DVB-C)
#2btw. when i try using DVB over IP with m3u Playlist apps "freezes" (i'll see around 25% cpu usage, but time is not counting nor can i stop or do anything in the apps, just can terminate via taskmgr) instantly upon trying to rescan
but i'll see tuner usage on the fritzbox...
trying this on progTV on android the app crashes...
but i'll see tuner usage on the fritzbox...
trying this on progTV on android the app crashes...
Re: How to setup FritzBox Sat>IP (DVB-C)
#4After few years I want to use ProgDVB Pro again, but if I want use "SAT > IP Cable" with source of cable (Germany > Vodafone NRW (Symbol rate 6900)), no signal and more.
Configuration
SAT > IP over VPN to the Fritz!Box Cable, standard IP 192.178.1.1
Ping from my to the other network: approximately 25 ms...
Parts from the logs
rtsp.txt
Scanner.txt
Configuration
SAT > IP over VPN to the Fritz!Box Cable, standard IP 192.178.1.1
- openATV (Octagon SF8008) = works good with Plugin SAT > IP, channel searching works good
- DVBViewer = works near good (Windows Firewall must allow connection), channel searching works very poor, must use a pre-defined list for that
- ProgDVB = wouldn't work, Firewall for testing is off, but nothing...
Ping from my to the other network: approximately 25 ms...
Parts from the logs
rtsp.txt
Code: Select all
04:15:47.245 - ====================
04:15:47.250 - >> PLAY rtsp://192.168.178.1:554/stream=836 RTSP/1.0
CSeq: 3
User-Agent: VLC/2.1.3 LibVLC/2.1.3 Lavf/56.15.102 Mozilla/5.0 (Windows NT 10.0; Win64; x64) Gecko/20100101 AppleWebKit/537.36 (KHTML, like Gecko) Chrome/56.0.2924.87 Safari/537.36 Firefox/60.0 MAG200 stbapp
Session: 849
04:15:47.263 - satip: addpid 17
04:15:47.270 - satip: addpid 1
04:15:47.281 - satip: addpid 16
04:15:47.284 - ==================== 103
04:15:47.286 - RTSP/1.0 408 Request Time-out
CSeq: 3
Session: 849
RTP-Info: url=rtsp://192.168.178.1/stream=836
Code: Select all
04:15:34.401 - Init transponter scan. ScanTrasponderParseTS - satip://192.168.178.1/?src=1&freq=226&sr=6900&msys=dvbc&pids=0,1,16,17,18 long=1
04:15:34.414 - Open SDT Parser
04:15:34.444 - Open NIT Parser
04:15:34.458 - Open PAT Parser
04:15:46.912 - delta_tr 0ms SetTr delay 0ms delay10000
04:15:46.981 - Close PAT Parser 12531ms result=
04:15:46.981 - PAT scanner not complited! Skiped! m_RecordCount==0
04:15:47.008 - Close SDT Parser
04:15:47.021 - Close NIT Parser
04:15:47.021 - Scaning done. Error (0 channels)
04:15:47.026 -
04:15:47.032 - *** SS_ScannedThread
04:15:47.067 - *** SS_PreSetTransponder
04:15:47.071 - *** SS_SetTransponder
04:15:47.072 - SetTransponder.......................
04:15:47.087 - ScannerManager::OnSwitchEngineTransport
04:15:47.143 - After SetTransponder.......................
04:15:47.143 - *** SS_ScanningThread
Regards/Gruß
Padman
Padman
Re: How to setup FritzBox Sat>IP (DVB-C)
#5I need all logs in zip. Also, can you send me logs from good working app?