hello ,
can this function be possible ?
i mean to watch a channel like BBC & have Audio from another channel
Thanks
#4
Of course this can only work on the same transponder.
Instead of adding the Audio PID, just edit the existing one.
If more than one exists on the station, edit out the others.
Then set the channel properties to not update.
Store.
Close ProgDVB and restart it.
Now it should work.
Instead of adding the Audio PID, just edit the existing one.
If more than one exists on the station, edit out the others.
Then set the channel properties to not update.
Store.
Close ProgDVB and restart it.
Now it should work.
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
#5
ok i did all the stuff even rebooted my pc & still not got audio
here live what i did , frequence 11179 H 27500
channel 1 : Telelotto (PID=626)
channel 2 : Telemarket (PID=771)
ok i went to Telelotto i want his video + audio from Telemarket
i changed the value 626 by 771 saved close prog
lanched again progdvb went to Telelotto no audio found..
anyway this is a test of same transponder
but i need from different transponder is that is possible
Thanks
here live what i did , frequence 11179 H 27500
channel 1 : Telelotto (PID=626)
channel 2 : Telemarket (PID=771)
ok i went to Telelotto i want his video + audio from Telemarket
i changed the value 626 by 771 saved close prog
lanched again progdvb went to Telelotto no audio found..
but i need from different transponder is that is possible
Thanks
#8
Just a minute ago, I've tried exactly this over here.
And it did work easily, on ProgDVB 4.75, which is the latest version, that supports my Nexus' hardware features (almost) fully, and therefore is used here by default.
(OT: As I'm still running (a highly modified version of) Win98SE right now, for expensive hardware compatibility reasons, I will not retest on a more modern version through the following couple of days. My other machine does not have satellite.)
Did not even have to close and restart or anything else. Just switched channel back and forth once.
BTW, this old version won't read transponder tables at run time, so no auto update, except of scan time.
To avoid an unwanted update, set station to not update, and perhaps also edit the SID to an invalid value like 8191.
Anyway, I won't want to watch any of those stations, even if someone gave me money for this ...
But of course, that's no more than my personal point of view.
And it did work easily, on ProgDVB 4.75, which is the latest version, that supports my Nexus' hardware features (almost) fully, and therefore is used here by default.
(OT: As I'm still running (a highly modified version of) Win98SE right now, for expensive hardware compatibility reasons, I will not retest on a more modern version through the following couple of days. My other machine does not have satellite.)
Did not even have to close and restart or anything else. Just switched channel back and forth once.
BTW, this old version won't read transponder tables at run time, so no auto update, except of scan time.
To avoid an unwanted update, set station to not update, and perhaps also edit the SID to an invalid value like 8191.
Anyway, I won't want to watch any of those stations, even if someone gave me money for this ...
But of course, that's no more than my personal point of view.
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
#9
actually this not even my wanted channel but just a simple test ...
i just want to see this functionallity working for me on my Progdvb pro version .
that's all what i need & i'am open of all suggestion how to make it work
i'am using version 6.24
i just want to see this functionallity working for me on my Progdvb pro version .
that's all what i need & i'am open of all suggestion how to make it work
i'am using version 6.24
#11
Pro version issue.John wrote:i just want to see this functionallity working for me on my Progdvb pro version
So I'm out of this thread now.
Prog, where are you?