If you have signal and not have picture then problem in codecs. Also try rescan satellite.

I have rescanned satellite again.
I got infos about the running program, but:
Signal=0, Q=0 but Infos !

Technisat-program does the job, so the hardware should be ok.
After changing to "store data for each user) I rearranged all sd-changels totally ok.

My settings for Cyberlink HAVE BEEN WORKING very well up to ~ 6.4

not today, but tomorow I`ll try deinstall ProgDVB and reinstall completely in C:\ - if you menawhile didnt have another idea
Just before I'll reinstall Cyberlink.
Let you know.

Again: Thanks for your quick and extensive help!

If not signal then no channel... select all losted channels after scan.

ps: check settings->Device options

relax....

I've deinstalled completely, cleaned also up the registry, killed the device from Windows.
Shut computer down (no restart!) and restarted than manually.

First: Win7-64 recognizes the "new" Device and gives a driver online. This is another I got before!
First offered driver only recognizes "BDA-device" for the Technisat HD2, this one offers the card direct.

Installed ProgDVB 60.07 again and set (even if switch is available) to Astra 19 only.
Rescan and all the missed HD-TV-stations are back again - and working - not perfect, but better than before (black screen, no sound)
Now I´ve to fiddle with the Codecs again... anyway.

But:

shutting down ProgDVB I always get an "programmm error" by Win7-64 and have to close manually.
Result: Next start offers resetting all settings or normal start.
Ok if you like to watch TV live, deadly when having timers!

... also the latest version 6.61 (?) didnt close. Win7-64 is reporting an error and kills the prog.
Which results in upcoming "set defaults - set normal"

No timed recordings possible.