Display posts from previous
Sort by

#19 by Juergen
Just an idea:
If some well known special plugin was used before, it may not be enough, to simply deactivate it. If written badly, it may even then reside in memory and keep on running in the background, somehow. By this it may even stay up, if another ProgDVB installation is used.
This for, reboot the machine afterwards.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#20 by norro
Hi Prog,

I just did what you asked. Installed version 4.88.6[2.22/standard ed] and the following is noticed:

- memory usage correct
- Video does hang when e.g. format of transmission is changed (advertisements on e.g. sky news)

I'll elaborate a bit further on the 5 version:

- Quite often it will stop the video on certain channels while audio is still heard.
- memory leak.

#21 by Juergen
What codec(s) / graph / renderer do you use?

BTW, perhaps (all of you) put relevant details into your profile --> signature
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

Re: .

#25 by Wombat_01
Prog wrote:Do you have memory leak only if OSD enabled?
yes, since i disabled OSD my sytem hasn`t crashed and my memoryleak problem has disapeared or is only minimal (40 to 60 MB).

I am not using subtitle nor teletext.


Skol,
wombat_01

(using at this moment Version 5.12.05 pro)

#28 by Juergen
So, to all of you now:

Please give all relevant details, as we told already.
And please put them into your signatures.
This will also show up in all your older postings.

So we don't have to ask the same questions or case reread everyone's old postings (if any existing) over and over again...

That's what signatures are meant for...

Plus, if available for you, test and compare with another codec.
And try the latest version(s), as possibly your bug may already be fixed there.
Let us know, to help us helping you...
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#29 by norro
Ok sig changed.


Latest version 5.12.06.

I tried vmr9 and progdvb renderer. It has no effect on the memory. Usage is still increasing.

OSD on or off has no effect.

In windowed mode the memory usage is stabilized.

I use elecard mpeg2 decoder version 1.0.215(build 60621) state Activate, progdvb.


Do you need more info? Just ask.
OS: Win XP, Graphics card: radeon HD2600-512MB, 4G ram, Q6600, DVB-S: Technotrend S2-3600 (usb) driver TT 2.19h, software mode (Skystar1 over TT version 1.36, api 1.33). Technotrend drivers: saa7146n.sys (ver 1.7.0.6), ttloophe.sys (ver 1.9.0.1).

Progdvb Pro, registered.

Also hauppauge WinTV Nexus-S (rev 2.1? not the newest).

#30 by norro
any solutions yet?
OS: Win XP, Graphics card: radeon HD2600-512MB, 4G ram, Q6600, DVB-S: Technotrend S2-3600 (usb) driver TT 2.19h, software mode (Skystar1 over TT version 1.36, api 1.33). Technotrend drivers: saa7146n.sys (ver 1.7.0.6), ttloophe.sys (ver 1.9.0.1).

Progdvb Pro, registered.

Also hauppauge WinTV Nexus-S (rev 2.1? not the newest).