ok i have found something interesting:

Committed lnb1 raw command E0 10 38 F0
Committed lnb2 raw command E0 10 38 F4
Committed lnb3 raw command E0 10 38 F8
Committed lnb4 raw command E0 10 38 FC
(Uncommitted lnb 1 to 16 in Mytheatre)
Uncommitted CMD 0 raw command E0 10 39 F0
Uncommitted CMD 1 raw command E0 10 39 F1
Uncommitted CMD 2 raw command E0 10 39 F2
Uncommitted CMD 3 raw command E0 10 39 F3
Uncommitted CMD 4 raw command E0 10 39 F4
Uncommitted CMD 5 raw command E0 10 39 F5
Uncommitted CMD 6 raw command E0 10 39 F6
Uncommitted CMD 7 raw command E0 10 39 F7
Uncommitted CMD 8 raw command E0 10 39 F8
Uncommitted CMD 9 raw command E0 10 39 F9
Uncommitted CMD A raw command E0 10 39 FA
Uncommitted CMD B raw command E0 10 39 FB
Uncommitted CMD C raw command E0 10 39 FC
Uncommitted CMD D raw command E0 10 39 FD
Uncommitted CMD E raw command E0 10 39 FE
Uncommitted CMD F raw command E0 10 39 FF

Information from Eutelsat; Bus Functional Specification Version 4.2 Section 8 Definition of Diseqc Bus Commands. Page 13.

E0 is the frame bite, first transmission.

10 is the address bite, any switcher.

38 is Committed switch command "Write to port group 0"
39 is uncommitted switch command "Write to port group 1"


hope it will help you

But ProgDVB already send E0 10 39 Fx in the current version.

Prog wrote:But ProgDVB already send E0 10 39 Fx in the current version.

but i get no "Lock" for Signal !

maybe the commited commands are send first ??
i need UNCOMMITED switch commands ONLY to get signal on each LNB !

is there something what i can do or can you build a new test version for me

Prog wrote:But ProgDVB already send E0 10 39 Fx in the current version.

i tried definitely all combinations in ProgDVB !
set to diseq switch 1.1 with 16 lnb's and tried every port for each lnb but no signal !!
in mytheatre where you can set uncommited in diseq menu all lnb's are working but in ProgDVB not

can you please set an extra option for uncommited switch ??

What this option must do?

Prog wrote:What this option must do?

it must send RAW commands to each LNB !

E0 10 39 F0 for LNB 0

E0 10 39 F1 for LNB 1

and so on upto LNB 7 (8 LNB uncommited switch commands needed)

Yes. current version of ProgDVB send this commands.

Prog wrote:Yes. current version of ProgDVB send this commands.

look i have 2 different working modes that i can use in enigma for my linux set-top box in diseq menu where these kind of diseq switches are working without any problems !

first option is to set diseq command AA and uncommited input 1 for 1.LNB

diseq command AA and uncommited input 2 for 2.LNB

diseq command AA and uncommited input 3 for 3.LNB

diseq command AA and uncommited input 4 for 4.LNB

and so on ...

other possibilty is to set uncommited commands ONLY ! like this:

diseq command set to NONE and uncommited input 1 for 1.LNB

diseq command set to NONE and uncommited input 2 for 2.LNB

diseq command set to NONE and uncommited input 3 for 3.LNB

diseq command set to NONE and uncommited input 4 for 4.LNB

and so on ...

at moment ProgDVB can only set to 1 special commited diseqc command from LNB 1-16

what i need is the commands like above. diseq command AA (1) and uncomitted for each LNB

OR

diseqc command to NONE (no diseq command like in ProgDVB!!) + uncommited raw command for each LNB

i hope that you understand the problem with these EMP Centauri and other 1.2 special diseqc switches

This version (and all > 6.06) must work
http://test.progdvb.com/ProgDVB6.06.5xStd.exe

[quote=rotarum]set to diseq switch 1.1 with 16 lnb's and tried every port for each lnb but no signal !! [/quote]

I tried also to use this diseqc 1.1 for 16 lnb's but without succes.Does anyone managed to use this function succesful?

Last version of ProgDVB must work with 1.1. What DVB card you have?

I am using Technisat SS2 HD card with TechniSat Mantis BDA HID Device and of course ProgDVB 6.10.1.I tried,I think,everything to activate this function:I choose Switch from Diseqc and providers,after that I click DiSEqC 1.1{16 ports}.I put on 16 "empty" positions all 16 satellites.Only first lnb -satellite{position} is working, the rest are dead.
I must tell that I am using 16/1 diseqc switch from EMP-Centauri
What is wrong?
thanks

Hi Prog,

In the end I succeed to use diseqc 1.1 for 16 lnbs.I installed last version of ProgDVB,6.10.02.I choose Switch diseqc 1.1 for 16 lnbs and I scan every satellite one by one,and not satellites list scaned before as I did before!Maybe this is important step to use this function.Of course I used EMP Centauri switch 16/1.Perhaps this switch help me.
On other hand,I want to activate PIP function.How?
Do you have a tutorial for ProgDVB for the sixth version?

Alt Click on other channel.

I have the same problem too. I am using Technisat SkyStar HD 2 card with TechniSat Mantis BDA HID Device and 2 LNB’s with DiSEqC 1.1 (Astra, Hotbirt). ProgDVB 6.06.05 works flawlessly!? Last version of ProgDVB,6.10.02 with DiSEqC switch not working, no signal on LNB2!