I bought a CI-Slot for my Technisat Skystar HD2 (BDA-Driver).
I plugged a Cryptoworks Module with ORF-Card in it.
I activated the Cam-Interface in ProgDVB.
If i click Options - Cam-Interface, it says "Waiting for Data ...", but no Data appears (i waited for 1 hour).
Wot´s on Prog, how can i make it working ?
I use the latest ProgDVB 6.30.03
#2
Try to select the cryptoworks related ECM as default in ProgDVB channel properties.
AFAIK this should be identified as CA-type 0xD05 for ORF.
Switch channel back and forth then.
If working, set channel props to not update.
BTW, CAM operation may be hardware depending. In case you may have to check device settings, IF ProgDVB's device supports CI / CAM controls on that tuner (already).
AFAIK this should be identified as CA-type 0xD05 for ORF.
Switch channel back and forth then.
If working, set channel props to not update.
BTW, CAM operation may be hardware depending. In case you may have to check device settings, IF ProgDVB's device supports CI / CAM controls on that tuner (already).
Last edited by Juergen on Fri Jan 08, 2010 10:11 pm, edited 1 time in total.
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Kanaleigenschaften
#4Lieber Jürgen !
Bei den Kanaleigenschaften (CAM) ist ja Cryptoworks an erster Stelle.
Da kann ich nichts umstellen oder als Default wählen.
Bei den Kanaleigenschaften (CAM) ist ja Cryptoworks an erster Stelle.
Da kann ich nichts umstellen oder als Default wählen.
ProgDVB 6.48.4
Decoding of ORF under DVB-Viewer works, under ProgDVB sucks
#6Why decoding of ORF under DVB-Viewer TE2 works but under ProgDVB sucks ?
I use the Technisat Skystar HD2 CI-Slot and the Technisat CW Ci-Module with a new ORF-Smartcard.
My OS is Windows 7 x64 Professional.
I use the Technisat Skystar HD2 CI-Slot and the Technisat CW Ci-Module with a new ORF-Smartcard.
My OS is Windows 7 x64 Professional.
ProgDVB 6.48.4
#7
At least on older versions of ProgDVB (did not test the recent ones for that), you could double click an ECM entry in channel properties, to transfer it to the ECM ID field, which would make it default.
My signature:
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>
Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!
I don't give support by e-mail or PM.
And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!
NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.
Please keep it in English here, or Russian in the Russian section, or German in the German section.
I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!
1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode
19.2°,13°,28.x°E,30°W, DiSEqC 1.0
Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>