Display posts from previous
Sort by

#2 by Juergen
What EXACTLY do you need that for?
ProgDVB comes with it's own DiSEqC controls.
Should work up to DiSEqC 1.2, on an SS1 for example.
Device list shows card functions, if your card is selected.

What card type do you use, EXACTLY?
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

Re

#3 by mdallison1
I havve a Technotrend s2-3200, I can't seem to get the dish to move at all, how do you use the prog dvb plugin. Sorry if that sounds lame, but I'm new to this. BTW The dish moves fine when I use the buttons on the motor.

#4 by Juergen
What kind of control does your motor need, exactly?

BTW, as far as I know, ProgDVB can NOT control DiSEqC on BDA driver based devices, only with WDM drivers.

However, this is from progdvb.com download / history pages:
4.78 Support diseq 1.1
4.78 Support USALS (requst more tests).

ProgDVB 4.21
Remake diseq options.
Add diseq 1.2 positioner support.
But 2.x special features (slave responding) not supported, as no DVB-s device does that.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#5 by bricolux
I also bought a TT 3200 and couldnt switch between the channels on a different frequency/satellite (I have a 2way switch with astra and hotbird). The TT driver ver. 4.something was just not working with progdvb, but only with the TT MCE.
A few days ago TT issued the driver 5.0.0.2 which is now working perfectely (at last).
:lol: