btw, in log you use asrsoft codec. This codec working only with arcsoft demux. I am recommend use MS or other codecs.

Prog wrote:btw, in log you use asrsoft codec. This codec working only with arcsoft demux. I am recommend use MS or other codecs.

it is not strange, make sure that the necessary codec is registered in the OS.

Prog wrote:btw, in log you use asrsoft codec. This codec working only with arcsoft demux. I am recommend use MS or other codecs.

logs with Prog Demux and "Microsoft DTV-DVD Video Decoder" , are you OK with this setting? same error.
also all codec i using are registered correctly !!

Im use EVRCustom, no problem. it shall be the solution of this problem becourse this is Prog renderer , and with errors MS EVR he does not could do. And tested own rend in the first place.

V.Zhukoff wrote:Im use EVRCustom, no problem. it shall be the solution of this problem becourse this is Prog renderer , and with errors MS EVR he does not could do. And tested own rend in the first place.

hello my friend , but i have no idea what you are saying !!
sorry 4 spam !

FTA_Boy wrote:but i have no idea what you are saying !!

but i have not idea about you said
sorry///

@Prog , for test i downgraded my ProgDVB version to 6.87.06 and tested again things i described you in previous posts , no error after crash and work perfect with different codec and demux , so ProgDVB6.87.06Pro is ok after crash & restart , and the problem is inside the ProgDVB6.90Pro
thank you in advance
Regards FTA_Boy

I got more idea. FTA_Boy has x32 OS. I think the problem here.
Prog, check please this moment in the last versions.

Open EPG --> select one programm --> right click and "Copy programm"

After this ProgDVB crashed.

Please send me files from Logs\reports directory

Prog wrote:Please send me files from Logs\reports directory

https://docs.google.com/open?id=0B6o39p ... TI5czdrcE0

6.91.2 unable to activate Pinnacle 510e Quattro-Stick, neither in DVB-C nor in DVB-T; no signal and no channel found (6.91.1. does in both modes!). Btw: with Pinnacle Quattro-Stick, either DVB-T or DVB-C can be activated

2nd Problem: DVB-T-part of Pinnacle 510e cannot be disabled (what is needed to activate DVB-C-part) in advanced TV-source-selection (no "disable"-button). To select DVB-C (what does not capt anything), first, DVB-C has to be activated, but it immediately gets red with red cross. Then simple mode has to be selected and cross at DVB-T has to be deselected (you have to know whichone is whichone as the "C" is not visible as the space for the name is too short; the rest of the name is the same), then you can go back to advanced mode to control that really DVB-C is active (but as written above: no DVB-C-reception at all).

Small bug in last version. You can switch devices in simple mode

Not having "disable"-button in advanced view can be considered as "cosmetic bug" – that's one thing.

But even when having DVB-C via simple-view-mode there is NO DVB-C reception at all – nothing viewable at all.

I made the test with 6.91.1: all installed and prechosen a viewable DVB-C channel. Installed 6.91.2 over it and only checked that all settings have remained the same (and nothing changed): no TV-reception with 6.91.2 in DVB-C at all (and neither in DVB-T when doing the same with DVB-T) with Pinnacle 510e.

problem with progdvb 6.91.2 in Manual Search , when i go to Manual Search it take a lot of time to open this window (not responding...) and after it open there is no signal (signal : none) , when i click Lock , it lock on the tp and become green but after 1second again automatically saying signal : none. but i have good signal on all frequency's and i can watch channels with progdvb before was scanned , same with full satellite search ...
also some times on some channels which have no PID and need to update , when click on Update button in channel properties window , progdvb will crash...