Display posts from previous
Sort by

Hauppage HVR-4000, Vista and ProgDVB

#1 by janus74
Hi. After reading this forum I have tried the following:

1) Installing HVR-4000 and latest drivers on Vista Ultimate
2) DVB-S works for FTA with supplied application
3) ProgDVB is unable to start the DVB-S-tuner using DBA drivers.
4) I tried manipulating TuningSpaces, but to no success.
5) DVB-t works with ProgDVB.

My question is: Have anyone succeeded getting HVR-4000 and ProgDVB to work in Vista ? If yes - what is your configuration ?

Regards,
Janus74

Re: Hauppage HVR-4000, Vista and ProgDVB

#2 by bud
janus74 wrote:Hi. After reading this forum I have tried the following:

1) Installing HVR-4000 and latest drivers on Vista Ultimate
2) DVB-S works for FTA with supplied application
3) ProgDVB is unable to start the DVB-S-tuner using DBA drivers.
4) I tried manipulating TuningSpaces, but to no success.
5) DVB-t works with ProgDVB.

My question is: Have anyone succeeded getting HVR-4000 and ProgDVB to work in Vista ? If yes - what is your configuration ?

Regards,
Janus74
Yes, HVR 4000 works with ProgDVB,
for DVB-S you must disable Hauppauge WinTV 88X DVB-T and
enable Hauppauge WinTV 88X DVB-S/S2 in device list.

all DVB-S transponder works, DiseqC works,

and @prog wrote me,
@that he wait of a sample of HVR 4000 and after that he can more debug@
for DVB-S2 transponder :lol:

HVR 4000

#3 by bud
with the new ProgDVB 5.12.7 pro

HVR 4000 works:

DiseqC is OK,
DVB-S2 transponder on Astra (with transponder 11914 - Premiere HD),
and Hotbird is OK,

many thanks @prog

#4 by Juergen
Thank you for this feedback 8)
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#5 by rotarum
its NOT WORKING here with my hauppauge nova hd-s2 (still no lock signal on 11914) :cry:

i have also tried other pilot and roll off settings with no success !

only 11914 is not working the rest of s2 transponders are ok with pilot on. this makes me crazy :(

#6 by bud
rotarum wrote:its NOT WORKING here with my hauppauge nova hd-s2 (still no lock signal on 11914) :cry:

i have also tried other pilot and roll off settings with no success !

only 11914 is not working the rest of s2 transponders are ok with pilot on. this makes me crazy :(
try the new Beta-driver:
88x_2_121_25351_Beta,

on my HVR 4000 i must 2 click on lock the signal, i must no pilot, roll off,
this is automatic set with this driver,

#7 by rotarum
bud wrote:
rotarum wrote:its NOT WORKING here with my hauppauge nova hd-s2 (still no lock signal on 11914) :cry:

i have also tried other pilot and roll off settings with no success !

only 11914 is not working the rest of s2 transponders are ok with pilot on. this makes me crazy :(
try the new Beta-driver:
88x_2_121_25351_Beta,

on my HVR 4000 i must 2 click on lock the signal, i must no pilot, roll off,
this is automatic set with this driver,
incredible ! its really working !!! :D

but only in latest 5.12.7 ! in 5.12.6 or earlier its not working. i have tested some versions ...
astra 19e is ok, now i will test other like hotbird or eutelsat w3 :)