Display posts from previous
Sort by

.

#151 by Prog
May ProgDVB not correct detect time on this channel?

#152 by Juergen
@ Frank

Try the same with staion already selected and change channel removed from scheduler.
If this does work, try with a full schedule again, but hand edit to a bigger interval between channel change and record start.

Looks like one of the scheduler commands does not get executed successfully, and the first one is change channel.

Satellite time should not matter. AFAIK ProbDVB does not use it.
If (it or) system time was wrong, all scheduler commands would just be executed at a different time, but all still working, normally.
Else I have been missing a new feature recently...

Make sure no plugins are involved, as some may need much more time to start working properly after channel change, perhaps a minute or even more.


Do you occasionally have any similar issues with manual controls?
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#153 by Frank
Thank you for your help!
I tried just the 'combined' command for record (this one created by the EPG or 'Add record' which makes channel change, start record and stop record with one row )
If I split into three rows :
- channel change
- record
- stop

it works.

Greatings
Frank
GA965P; Core2Duo 2,1 Ghz; ATI 1600XT PCIe; 2Gb; TT Premium 1.3 moded, driver: TT 2.19h software mode; WinXP;

#154 by Juergen
So this seems to be a bug of the new scheduler, as it won't allow any wait state between command( component)s ?

You are now using the good old way that was working well over all the years ;)
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

#155 by Frozen
*suddenly Loosing control of OSD ( Just i can control channel trees ) = 5.12.8 - 5.12.10 =
* crash when scan a sat include many transporders ( like Hotbird ) = 5.13 =
OS : Win XP SP2
CPU : P4 Intel 3.00 GHz "HT"
Memory : 2 GB
DVB-S : Sky Star 2 (2.6D) ( 4.4.0 )
Hotbird 13.0°E | Badr-3/4 26.0°E | Nilesat 101/102 7.0°W

.

#156 by Prog
Do you have crash with SS2? WDM driver?

Re: .

#157 by Frozen
Prog wrote:Do you have crash with SS2? WDM driver?
yip , with 4.4.0 driver

and as i said the application just crash when scan a sat include many transporder

note : I tried to do that " AdditionDelayAfterSetTransponder=500 " but nothing change
OS : Win XP SP2
CPU : P4 Intel 3.00 GHz "HT"
Memory : 2 GB
DVB-S : Sky Star 2 (2.6D) ( 4.4.0 )
Hotbird 13.0°E | Badr-3/4 26.0°E | Nilesat 101/102 7.0°W

.

#159 by Prog
thehoff wrote:5.13 still says 5.12.10
I am already update file on site. Now must be 5.13

Re: .

#160 by Frozen
Prog wrote:
thehoff wrote:5.13 still says 5.12.10
I am already update file on site. Now must be 5.13
is that mean the ver. i have tested was 5.10.12 , or it's just name problem !
OS : Win XP SP2
CPU : P4 Intel 3.00 GHz "HT"
Memory : 2 GB
DVB-S : Sky Star 2 (2.6D) ( 4.4.0 )
Hotbird 13.0°E | Badr-3/4 26.0°E | Nilesat 101/102 7.0°W

#161 by thehoff
hmmm after a while 5.13 hangs and the whole system crashes..mousecuros moves very slowely...computer acts very slow too....cant realy close progdvb...only solution is a reboot.

#163 by thehoff
SS1/TT C-2300

i realized when this happens the cpu usage goes up to 100%

#164 by Frozen
Maybe some improvement with CI will be good :oops:
OS : Win XP SP2
CPU : P4 Intel 3.00 GHz "HT"
Memory : 2 GB
DVB-S : Sky Star 2 (2.6D) ( 4.4.0 )
Hotbird 13.0°E | Badr-3/4 26.0°E | Nilesat 101/102 7.0°W

Incorrect czech characters in teletext and EPG

#165 by loben
ProgDVB ver. 5.13
DVB-T
HW: DibCom7700 chip family hybrid tuner card

1. ProgDVB doesn't show czech characters correctly in teletext, even if i choose czech codepage.
See example:
Image
2. ProgDVB cuts off the rest of EPG text when offers acute accent in a word.
Czech DVB-T providers are using ISO/IEC 6937. See http://en.wikipedia.org/wiki/ISO/IEC_6937
Example:
Image
3. It would be best, if you add teletext font choice feature and automatic teletext subpage rotation.