Display posts from previous
Sort by

ProgDVB 4.89.7 (and 4.89.6) Failure...

#1 by Bi2Lmetall
Today i've got surprice...after the electrisity failed down... I open ProgDVB (both two) and it just don't start, (Program Not Responce, <windows vista>) and then i've got this error:
Image


Here is the ProgDVB.INI (both of my 2 ProgDVB).
http://rapidshare.com/files/96421137/pr ... i.rar.html

After I Delete the <progdvb.ini> the Program Works OK (of course i set up my settings again)
my stuff:

1st PC: Core2Quad (2.5Ghz), ASUS Proximus Extreme (1007), 2GB ram, nvidia 9600GT*2 (PCIe) + 7950GX2,
< 1stDVB - TechnoTrend S2300 + C.I. /Driver Technotrend 219h>
and < 2ndDVB - TechnoTrend S2300 /Driver Technotrend 219h>.
WinVista32 Ultimate. ProgDVB 5.x


2nd PC: AMD 4600+ X2 (2.51Ghz), GIGABYTE GA-K8NSC-939 ( F8 ), 3GB ram, nvidia FX5950ultra (AGP).
< 1stDVB - Hauppauge NEXUS-s/Driver Technotrend 219h>
and < 2ndDVB - Hauppauge NEXUS-s + C.I. /Driver Technotrend 219h>.
WinXP 32PRO. ProgDVB 5.x


3st PC: AMD 4200+ X2 (2.2Ghz), Asus A8n32-SLI Deluxe, 3GB Ram, Nvidia 9600gt 512mb (PCI-E),
<1stDVB - Hauppauge NEXUS-s /Driver Technotrend 219h>
and <2ndDVB - TechnoTrend S2300 + C.I. /Driver TechnoTrend 2.19h>.
WinVista 32 Ultimate, ProgDVB 5.x


LNB (13E,19E,39E,16E,42E,30W,1W,5E,26E,28E)

Re: .

#3 by Bi2Lmetall
Prog wrote:If you use BDA driver then must restart PC after crash any DVB software.
Yes i know that, and Thank you. But no, it's not crash by BDA driver, couse after i Delete the progdvb.ini (without restart) the progdvb works fine, i Think it is the latest line at my progdvb.ini,
Here is the only change betweine <Working .INI> and <crash .INI>.
Crash Progdvb.ini wrote:[MainTVWindow]
LastWindowMode=0
ShowToolBar=1
ShowStatusBar=1
ShowChannelListPanel=1
ShowNavigatorBar=1
TreePanelWith=456
WindowStatus=2C0000000000000001000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1A04000007000000FB050000C203000007
StayOnTop=0
CurrentTree=0
[ChannelFilter]
Enabled=0
Min_Quality=0
Min_Level=0
Min_Sym=0
Other=1
EmptyNode=1
Radio=1
TV=1
Scrambled=1
Working progdvb.ini wrote:[MainTVWindow]
TreePanelWith=451
WindowStatus=2C00000000000000010000000083FFFF0083FFFFFFFFFFFFFFFFFFFF390300000600000015050000B203000038
ShowStatusBar=1
ShowNavigatorBar=1
ShowToolBar=1
StayOnTop=0
CurrentTree=0
LastWindowMode=0
ShowChannelListPanel=1
But my quastion is, How does this change happend after electrisity Powerdown my Computer?
my stuff:

1st PC: Core2Quad (2.5Ghz), ASUS Proximus Extreme (1007), 2GB ram, nvidia 9600GT*2 (PCIe) + 7950GX2,
< 1stDVB - TechnoTrend S2300 + C.I. /Driver Technotrend 219h>
and < 2ndDVB - TechnoTrend S2300 /Driver Technotrend 219h>.
WinVista32 Ultimate. ProgDVB 5.x


2nd PC: AMD 4600+ X2 (2.51Ghz), GIGABYTE GA-K8NSC-939 ( F8 ), 3GB ram, nvidia FX5950ultra (AGP).
< 1stDVB - Hauppauge NEXUS-s/Driver Technotrend 219h>
and < 2ndDVB - Hauppauge NEXUS-s + C.I. /Driver Technotrend 219h>.
WinXP 32PRO. ProgDVB 5.x


3st PC: AMD 4200+ X2 (2.2Ghz), Asus A8n32-SLI Deluxe, 3GB Ram, Nvidia 9600gt 512mb (PCI-E),
<1stDVB - Hauppauge NEXUS-s /Driver Technotrend 219h>
and <2ndDVB - TechnoTrend S2300 + C.I. /Driver TechnoTrend 2.19h>.
WinVista 32 Ultimate, ProgDVB 5.x


LNB (13E,19E,39E,16E,42E,30W,1W,5E,26E,28E)

#5 by Bi2Lmetall
Prog, never mind - it doesn't matter, it's ok now
Thank you 8)
my stuff:

1st PC: Core2Quad (2.5Ghz), ASUS Proximus Extreme (1007), 2GB ram, nvidia 9600GT*2 (PCIe) + 7950GX2,
< 1stDVB - TechnoTrend S2300 + C.I. /Driver Technotrend 219h>
and < 2ndDVB - TechnoTrend S2300 /Driver Technotrend 219h>.
WinVista32 Ultimate. ProgDVB 5.x


2nd PC: AMD 4600+ X2 (2.51Ghz), GIGABYTE GA-K8NSC-939 ( F8 ), 3GB ram, nvidia FX5950ultra (AGP).
< 1stDVB - Hauppauge NEXUS-s/Driver Technotrend 219h>
and < 2ndDVB - Hauppauge NEXUS-s + C.I. /Driver Technotrend 219h>.
WinXP 32PRO. ProgDVB 5.x


3st PC: AMD 4200+ X2 (2.2Ghz), Asus A8n32-SLI Deluxe, 3GB Ram, Nvidia 9600gt 512mb (PCI-E),
<1stDVB - Hauppauge NEXUS-s /Driver Technotrend 219h>
and <2ndDVB - TechnoTrend S2300 + C.I. /Driver TechnoTrend 2.19h>.
WinVista 32 Ultimate, ProgDVB 5.x


LNB (13E,19E,39E,16E,42E,30W,1W,5E,26E,28E)

#6 by Juergen
ProgDVB.ini is active all the time, as long as ProgDVB is running. Normally it would get updated and then closed on ProgDVB shut down. Else, merely impossible to predict...

As you can never foresee exactly, what Windows itself does on power failure, it's possible, some other important component - like e.g. the registry - may also get corrupted (partly). As we know, in such a case, Windows may try to restore something without asking, on next start. This may, for example, bring outdated DirectShow registry settings or alike.

Don't break your head on this...
Just make a backup copy of ProgDVB (at least), once it's working fine again. Then it's your decision, to go back at any time.
And make sure to also have valid backups for the system.
Last edited by Juergen on Fri Mar 14, 2008 9:09 pm, edited 1 time in total.
My signature:

Please read here:
On Bug Reports And Other Complaints
and there:
BOARD RULES - READ THIS!


I don't give support by e-mail or PM.

And I will never assist on PayTV hacking.
PM ME FOR THIS AND YOUR ACCOUNT WILL BE DELETED IMMEDIATELY, WITHOUT ANY WARNING!!!

NEVER EVER DARE TO CONTACT ME FOR PRO VERSION ISSUES!
I am not responsible for that.
Check the 'Activation' section.

Please keep it in English here, or Russian in the Russian section, or German in the German section.

I don't read nor write Klingonian or any other language than English and German.
Addressing me personally in any exotic language will be treated as severe insulting! Be warned!!!

1.)AMD Phenom II x4 940, GA-MA770-UD3, 8 GB DDR2-6400. 7 Pro SP1 x64 + XP Pro SP3 x86
DVB-S2: Cynergy S2 USB HD
2.)P4 3200 i865G (F-S Scenic W600pwr) XP Pro SP3
DVB-S: hauppauge WinTV Nexus-S rev. 2.2, driver TT 2.19h, hardware mode

19.2°,13°,28.x°E,30°W, DiSEqC 1.0


Auf Deutsch:
DVB-Cube <<< Das deutsche DVB-Forum >>>

Re: .

#8 by Bi2Lmetall
Prog wrote:Last version of ProgDVB backup last good config and restory after crash.
xmm the bavkup file is the <ProgDVB.ini_copy> or there is some more file? Couse last days I geting the same error over and over...
I just delete the <ProgDVB.ini_copy> and "rebuild" my Progdvb.ini from the beginning. I hope that it gona work...
my stuff:

1st PC: Core2Quad (2.5Ghz), ASUS Proximus Extreme (1007), 2GB ram, nvidia 9600GT*2 (PCIe) + 7950GX2,
< 1stDVB - TechnoTrend S2300 + C.I. /Driver Technotrend 219h>
and < 2ndDVB - TechnoTrend S2300 /Driver Technotrend 219h>.
WinVista32 Ultimate. ProgDVB 5.x


2nd PC: AMD 4600+ X2 (2.51Ghz), GIGABYTE GA-K8NSC-939 ( F8 ), 3GB ram, nvidia FX5950ultra (AGP).
< 1stDVB - Hauppauge NEXUS-s/Driver Technotrend 219h>
and < 2ndDVB - Hauppauge NEXUS-s + C.I. /Driver Technotrend 219h>.
WinXP 32PRO. ProgDVB 5.x


3st PC: AMD 4200+ X2 (2.2Ghz), Asus A8n32-SLI Deluxe, 3GB Ram, Nvidia 9600gt 512mb (PCI-E),
<1stDVB - Hauppauge NEXUS-s /Driver Technotrend 219h>
and <2ndDVB - TechnoTrend S2300 + C.I. /Driver TechnoTrend 2.19h>.
WinVista 32 Ultimate, ProgDVB 5.x


LNB (13E,19E,39E,16E,42E,30W,1W,5E,26E,28E)

#9 by Bi2Lmetall
Today i have the same problem...Progdvb HangUp at the Start and i've got the same error. I Delete Progdvb.ini and progdvb.ini_copy and all work OK...but tomorrow i will have the same problem :cry: :cry:
my stuff:

1st PC: Core2Quad (2.5Ghz), ASUS Proximus Extreme (1007), 2GB ram, nvidia 9600GT*2 (PCIe) + 7950GX2,
< 1stDVB - TechnoTrend S2300 + C.I. /Driver Technotrend 219h>
and < 2ndDVB - TechnoTrend S2300 /Driver Technotrend 219h>.
WinVista32 Ultimate. ProgDVB 5.x


2nd PC: AMD 4600+ X2 (2.51Ghz), GIGABYTE GA-K8NSC-939 ( F8 ), 3GB ram, nvidia FX5950ultra (AGP).
< 1stDVB - Hauppauge NEXUS-s/Driver Technotrend 219h>
and < 2ndDVB - Hauppauge NEXUS-s + C.I. /Driver Technotrend 219h>.
WinXP 32PRO. ProgDVB 5.x


3st PC: AMD 4200+ X2 (2.2Ghz), Asus A8n32-SLI Deluxe, 3GB Ram, Nvidia 9600gt 512mb (PCI-E),
<1stDVB - Hauppauge NEXUS-s /Driver Technotrend 219h>
and <2ndDVB - TechnoTrend S2300 + C.I. /Driver TechnoTrend 2.19h>.
WinVista 32 Ultimate, ProgDVB 5.x


LNB (13E,19E,39E,16E,42E,30W,1W,5E,26E,28E)